Overview
The Pro Comp Suspension rear block, part number 64171, is a 1-inch rear block kit. A block like this sits between the axle and the spring seat to raise the rear of a vehicle by the stated amount.
This 1-inch rear block kit is made for universal fit, so it is not tied to a specific vehicle. Check the mounting layout and the 1-inch lift against your rear axle and spring setup before installing it.
Key features
- 1-inch rear lift
- Universal fit
Rear block and suspension balance
A rear block lifts the axle relative to the frame, which shifts how the leaf or coil springs carry load. Even a modest rise changes the stance and can alter how the vehicle sits when loaded. Adding a block without considering the rest of the suspension can leave the rear sitting higher than the front.
Many owners pair a rear block with a front lift or new shocks so the vehicle keeps a level stance. Longer brake lines and straps may be needed, and the old shocks can run near their travel limit. Compare the rear lift with the overall ride height plan before buying, and keep the original spring seats in good condition.
- Check front and rear height after fitting
- Inspect shocks for bottoming out
- Replace worn spring pads or isolators while the block is out
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 64171 |
| UPC | 614901230680 |
| Lift | 1 inch (rear) |
Vehicle fitment
This rear lift block is universal fit, so it is not tied to a specific vehicle. Confirm the lift height and mounting layout against your vehicle before ordering.
Installation notes
Measure driveline angles after the lift, since a rear block changes the axle angle. Plan the installation steps in advance.
What’s included
One 1-inch rear block kit. Check the package contents for the individual pieces and hardware before installation.








