Overview
The Fabtech FTSBK3 is a 3 inch rear lift block for trucks, part number FTSBK3. It is built to lift the back of a truck in a simple and cost effective way, and Fabtech offers lift blocks in a wide range of sizes for many applications.
It is a universal fit block, so it is not tied to a particular year, make or model. Compare it with your truck’s suspension before ordering.
Key features
- Rear lift block raising the back of the truck by 3 inches
- Designed as a simple, cost effective way to lift the rear
- Part of Fabtech’s lift block range, which covers several sizes
- Listed by Fabtech as universal fit
Living with a 3 inch lift
A 3 inch rear block raises the back of the truck enough to change how the axle and driveline sit. Expect more driveline angle, a slightly different ride and a rear that may look taller than the front. Set expectations before installing, especially if the truck carries heavy loads or tows.
Because the rear changes, many owners recheck their alignment and check the steering and brake lines for stretch. Keep an eye on the rear tires for uneven wear, and look at the spring pads and fasteners each time you service the truck. Good records of when you last checked the hardware make future work easier.
- Check driveline angles after installation
- Watch rear tires for uneven wear
- Recheck mounting hardware at each service
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTSBK3 |
| UPC | 674866005471 |
| Lift height | 3 inches |
| Position | Rear |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit block, so no specific vehicle is confirmed for it.
Confirm your vehicle’s year, model and trim before ordering. Check your suspension setup before installing a 3 inch rear block.
Installation notes
Raising the rear with a 3 inch block changes suspension geometry, so have the alignment and driveline angles checked once it is in. Work on a raised truck only with the vehicle secured on stable jack stands.
What’s included
The package is a Fabtech 3 inch rear lift block. Check the package contents against your installation before starting.






