Overview
The Pro Comp Suspension 95-300 is a 3 inch rear lift block kit with tapered blocks. It is made for leaf spring equipped vehicles that need rear lift, and the taper is designed to improve and retain the driveshaft angle.
Key features
- 3 inch rear lift
- Tapered blocks
- Improves and retains driveshaft angle
Before you install
A rear lift block sits between the leaf spring pack and the axle, so raising the axle changes how the springs and driveline sit. Before fitting any block, look over the springs, shackles, bushings and bump stops for wear or cracks. A worn spring pack or tired shackle bushings will not improve once the height is changed, and they are easier to replace while the axle is already down.
Tapered blocks help keep the pinion angle closer to the driveshaft angle as the axle is raised. Once the kit is in, check the driveshaft for vibration at highway speed and measure the u-joint angles with an inclinometer. Recheck the U-bolt nuts after the first few drives, since they can settle as the pack seats.
- Check spring shackles and bushings for wear
- Inspect U-bolts for stretching or thread damage
- Recheck driveline angles after the first drive
- Re-torque U-bolt nuts after initial use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-300 |
| UPC | 614901121865 |
| Lift height | 3 in |
| Position | Rear |
| Taper | Tapered |
| Sold as | Block kit |
Vehicle fitment
It is designed for leaf spring equipped vehicles that need rear lift. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The rear lift block kit.




