Overview
The Pro Comp 2-inch Lift Kit with PRO-M Shocks, part number EXPK4237MS, is a suspension lift for 2009 to 2013 Ford F-150 trucks. It is designed to run 35-inch tires while keeping factory ride quality.
The kit is part of Pro Comp’s Explorer line, which the company describes as a low center-of-gravity system for late-model trucks. It is meant to let the truck run 35-inch tires while keeping the factory ride quality. The lift is 2 inches, which Pro Comp says adds ground clearance and suspension travel.
The shocks are PRO-M units included with the kit. They are monotube shocks with a fast reaction and damping that stays consistent without fading or leaking. The bolt-in parts install without frame modifications, so the factory frame stays unchanged.
This F-150 kit is one of the vehicle-specific versions in the Explorer line, which is tuned for mid-size, half-ton and three-quarter-ton trucks. It pairs a 2-inch lift with 35-inch tire clearance.
The bolt-in design keeps the factory components in use. Confirm tire size and clearance for your wheel setup before ordering.
Key features
- 2-inch suspension lift
- PRO-M monotube shocks included
- 35-inch tire size
- Bolt-in installation with no frame modifications
- Low center-of-gravity design
Choosing tires after a lift
A lift changes how a truck sits, so tire choice matters as much as the kit itself. Larger tires add rotating weight and change effective gearing, which can affect acceleration, braking and fuel use. Before buying tires, check clearance at full steering lock and under suspension compression, since rubbing depends on wheel offset and backspacing as well as lift height.
Shock absorbers and mounting hardware see more load once heavier tires and extra suspension travel are in use. After the first few drives, inspect the shock bodies for leaks and the bushings for cracks, and re-tighten fasteners that were disturbed during installation. Brake lines and flexible hoses should also be checked where they may have been stretched by the lift.
- Check tire clearance at full steering lock
- Re-tighten fasteners after the first drives
- Inspect shocks for leaks and worn bushings
- Recheck alignment after any tire size change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK4237MS |
| Suspension type | Lift kit |
| Lift height | 2 inches |
| Tire size | 35 inches |
| Shocks included | Yes |
| Front shocks | PRO-M |
| Fit type | Direct fit |
Vehicle fitment
It fits 2009 to 2013 Ford F-150 trucks in the FX2, FX4, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT versions.
It does not cover 2014 and newer F-150 trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lifting the F-150 changes the alignment and the driveline angles, so have both checked once the kit is in place.
What’s included
The 2-inch lift kit with PRO-M shocks.











