Overview
The Fab Fours DR13-K2961-B is a bare steel Black Steel replacement front bumper for 2012 to 2018 Ram 1500 trucks, offered without a coating so the owner can paint or finish it.
Fab Fours shaped this ranch-style bumper to match the body lines of the Ram 1500, with tapered edges and no vertical flanges. It has tow hooks, takes the factory fog lights, and can be fitted with an optional bolt-on winch mount for winches of 12,000 lb or less.
Key features
- Bare steel finish
- 14 gauge steel
- Tow hooks included
- Accepts the factory fog lights
- Optional winch mount for 12,000 lb winches
- Optional bolt-on D-ring mounts
- Optional bolt-on 2-inch receiver
Tow hooks and recovery points
Tow hooks are built into the bumper for recovery and are one of the first parts to be used in a stuck situation. Use them with a rated strap or shackle, and pull straight on, since angled pulls put side loads on the mounting points. Inspect the hooks for cracks, bending and loose bolts after any hard recovery.
A bare steel bumper often needs more care than a coated one. Scratches from rocks and branches can expose the metal, so protect the finish before trail trips. If you add a winch later, check that the frame and the bumper’s mounting points can handle the extra load, and plan the wiring before fitting it.
- Use rated straps and shackles only
- Pull straight to limit side loads
- Inspect hooks after every recovery
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR13-K2961-B |
| UPC | 5810109264 |
| Type | Black Steel replacement front bumper |
| Position | Front |
| Width | Full |
| Material | 14 gauge steel |
| Finish | Bare |
| Fit type | Direct fit |
| Tow hooks | Included |
| Light mounts | Not included; accepts factory fog lights |
| Winch mount | Optional, not included (12,000 lb winches) |
Vehicle fitment
Fab Fours lists DR13-K2961-B for the 2012 to 2018 Ram 1500 only.
The Ram 2500 and 3500 and the earlier Ram 1500 trucks are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bare steel should be painted or coated before use. The tow hooks are provided and the optional parts bolt on.
What’s included
- Black Steel replacement front bumper, bare steel
- Tow hooks
Not included: Paint or coating, the optional winch mount, D-ring mounts, 2-inch receiver and any winch.









