Overview
The Fab Fours Matrix Series front bumper with pre-runner guard, part number FFIDR19-X4452-1, is a black steel bumper for 2019–2026 Ram 2500 and Ram 3500 trucks. It is the pre-runner guard version of the Matrix design, which Fab Fours made by combining its Premium Winch Bumper with the Vengeance Series.
The bumper is built to hold a 30-inch light bar and four cube LED lights. Winch mount compatibility is No for this version, so a winch should not be fitted to it.
Key features
- Pre-runner guard with the hoop included
- Holds a 30-inch light bar and four cube LED lights
- Winch capacity 12,000 lb
- D-ring mounts included
- Light mounts included
Guard and light setup
A pre-runner guard protects the front end when driving through brush and over rocks, and its hoop gives a fixed point for lights. Before fitting, check clearance to the radiator, the cooling fan and any front-facing sensor. Mount the light bar so it does not block the sensor view, and keep the wiring away from the hoop tubes where it could rub.
The D-ring mounts are useful for recovery, but they need the right hardware. Use straps or shackles rated for the load, and inspect the mounts and their bolts after rough use. Tighten all fasteners after the first few trips, and check the bumper for movement at the frame connection.
- Check radiator and sensor clearance
- Route light wiring away from the hoop
- Inspect D-ring mounts after rough use
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FFIDR19-X4452-1 |
| Product line | Matrix Series |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Black |
| Guard | Pre-runner guard |
| Hoop included | Yes |
| Stinger included | No |
| Light bar capacity | 30 inch |
| Winch capacity (described) | 12,000 lb |
| Winch mount compatible | No |
| D-ring mount included | Yes |
| Light mounts included | Yes |
| Fit type | Direct fit |
Vehicle fitment
It fits 2019–2026 Ram 2500 and Ram 3500 trucks, in the trims covered for each model year.
The list does not include the Ram 1500 or the Ram 2500 and 3500 trucks from 2018 and earlier.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Winch mount compatibility is No, so do not fit a winch to this version.
What’s included
The bumper includes the pre-runner guard hoop, the D-ring mounts and the light mounts.
Not included: the stinger, the light bar, the cube LED lights and any winch.











