Overview
The Power Trax Grip LS, part number PTXLS108831, is a limited-slip differential for the Ford 8.8-inch rear axle with 31 axle splines and a 1.32-inch axle shaft diameter. It is built for light trucks, sport utility vehicles and muscle cars that need more traction than an open differential gives on pavement.
The Grip LS combines limited-slip action with a fully machined case. Carbon-fiber and steel friction plates provide the grip, and an S-spring preload sets the lock. It arrives fully assembled, and the friction plates sit on machined internal gears, so the unit can be taken apart and rebuilt.
Key features
- Limited-slip design with carbon-fiber and steel friction plates
- Fully machined, all-new complete case
- S-spring preloaded limited-slip action
- Delivered fully assembled
- Friction plates on machined internal gears allow a rebuild
- 31 axle splines for Ford 8.8-inch axles
Rebuilding and axle service
A limited-slip rebuild involves cleaning the case, inspecting the friction plates and checking the preload spring. Worn plates lose their grip, and a worn spring can change how quickly the unit locks. Rebuild parts should be matched to this unit before work begins.
Limited-slip units depend on the right gear oil, so confirm the oil type before filling. Change the fluid at the interval the vehicle requires and watch for metal flakes on the drain plug magnet.
Installing a differential into a housing also means checking carrier bearings and backlash. Those steps are often handled best by a qualified axle shop. Mark the orientation of parts before disassembly so the setup goes back together correctly.
- Inspect friction plates for wear
- Check the S-spring for fatigue
- Replace stretched ring gear bolts
Specifications
| Brand | Power Trax |
|---|---|
| Part number | PTXLS108831 |
| Product line | Grip LS traction system |
| Differential type | Limited-slip assembly |
| Axle type | Ford 8.8-inch |
| Axle location | Rear |
| Axle spline count | 31 splines |
| Axle shaft diameter | 1.32 inches |
| Ring gear bolts | 10 |
| Cover bolts | 10 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the Ford Bronco from 1983 to 1996, the Econoline E-100 (1983), E-150 (1983–2006) and E-250 (1983–1988) vans, the F-150 from 1983 to 2014 (including the 2004 Heritage and the F-150 Lightning from 1993–1995 and 1999–2003), the F-250 from 1983 to 1992, the Ranger from 2005 to 2009 (FX4), the Expedition from 1997 to 2005, the Explorer from 1991 to 2010, the Explorer Sport from 1991 to 2003, and the Explorer Sport Trac from 2001 to 2005 and 2007 to 2010. Lincoln Aviator (2003–2005), Lincoln Navigator (1998–2000 and 2002) and Mercury Mountaineer (1997–2010) models also fit.
Close vehicles that are not on the list include F-150 models from 2015 on and Explorer models after 2010. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Grip LS replaces the open differential inside the axle housing, and the gear setup depends on the housing and carrier. Have a qualified axle shop install and check the unit, rather than fitting it at home.
What’s included
The differential arrives fully assembled as one unit. Check the package contents against your installation, including ring gear bolts, carrier parts and hardware, before starting.













