Select your vehicle

Power Stop Z36 Severe-Duty Truck & Tow Front Brake Kit – K7133-36

Power Stop

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front kit for 2021 Durango and 2016–2020 Grand Cherokee
  • Ceramic pads with carbon fibers
  • Zinc-plated drilled and slotted rotors
  • Stainless steel hardware, bolt-on

Description

Overview

The Power Stop K7133-36 is a Z36 Severe-Duty Truck & Tow front brake kit for the 2021 Dodge Durango and the 2016–2020 Jeep Grand Cherokee, with ceramic pads and drilled, slotted, zinc-plated rotors.

The Z36 Truck & Tow Brake Upgrade Kit is aimed at trucks, 4x4s and SUVs that work as hard as they play. Power Stop says its carbon-fiber reinforced ceramic pads stay low in dust and give severe-duty stopping power without sacrificing everyday drivability, while the rotors help hold brake temperatures down on long descents.

Key features

  • Front pad and rotor kit
  • Low-dust ceramic pads reinforced with carbon fibers
  • Drilled, slotted and zinc-plated rotors
  • Premium stainless steel hardware
  • Bolt-on installation
  • Aimed at towing, hauling and trail driving

Rotor and pad wear on SUVs

Front rotors on heavier SUVs wear faster when towing or hauling, and worn rotors can cause pulsation even when the new pads are fitted correctly. Zinc-plated rotors are used to resist surface rust during storage and wet weather, but the plating does not replace regular inspection. Carbon-fiber reinforced ceramic pads are designed to stay low in dust and remain quiet in everyday driving.

If the old rotors are grooved or below their minimum thickness, a rotor-and-pad kit makes more sense than new pads alone. Clean the hub face and remove any rust before mounting new rotors, since debris can cause runout. Confirm the wheel bolt torque after the first few drives, as rotors can settle slightly.

  • Clean hub faces before fitting new rotors
  • Check for pulsation after the first few stops
  • Replace worn wheel studs or lug nuts as needed

Specifications

Brand Power Stop
Part number K7133-36
Series Z36 Severe-Duty Truck & Tow
Axle position Front
Fit type Direct fit
Pad formula Ceramic reinforced with carbon fibers
Rotor design Drilled and slotted, zinc-plated
Hardware Premium stainless steel

Vehicle fitment

It fits the 2021 Dodge Durango, the 2016-2017 Jeep Grand Cherokee and the 2018-2020 Jeep Grand Cherokee.

Durango years other than 2021 are not on this list, and the 2016–2017 and 2018–2020 Grand Cherokee entries leave 2021 out. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit includes stainless steel hardware, so the pads, rotors and hardware are all replaced together on the front axle.

What’s included

  • Front drilled, slotted and zinc-plated rotors
  • Z36 ceramic pads with carbon fibers
  • Premium stainless steel hardware

Not included: Rear brake parts and calipers.

Fitment

VehicleYearsTrims
Dodge Durango2021Citadel, GT, GT Plus, R/T, SXT, SXT Plus
Jeep Grand Cherokee2018–2020Altitude, High Altitude, Laredo, Limited, Limited X, Overland, Summit, Trailhawk, Upland
Jeep Grand Cherokee (WK)2016–201775th Anniversary, Laredo, Limited, Overland, Summit, Trailhawk

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Jeep Grand Cherokee years does the K7133-36 fit?

The K7133-36 fits the 2016-2017 and 2018-2020 Jeep Grand Cherokee. Confirm fit for a 2021 Grand Cherokee before ordering, since that year is not covered by these entries.

Does the K7133-36 fit an older Dodge Durango?

No. Power Stop lists only the 2021 Dodge Durango for this front kit. Earlier Durangos need other part numbers, so confirm your model year before ordering.

What is in the K7133-36 brake kit?

Drilled, slotted and zinc-plated rotors, Z36 ceramic pads reinforced with carbon fibers and premium stainless steel hardware, supplied for the front position.

Is the K7133-36 meant for towing?

The Z36 Truck & Tow kit is an easy bolt-on upgrade for trucks, 4x4s and SUVs that tow a boat or trailer, haul on the jobsite or run tough trails.

Why do brake rotors need to be replaced with pads?

Pads wear into rotors over time, and a worn surface can reduce braking and cause vibration. Replacing the rotors with the pads gives both friction surfaces a matched finish, helps the new pads bed in evenly, and avoids uneven wear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon