Overview
The Power Stop K15114DK is a front and rear Z23 Evolution Sport brake upgrade kit for the 1997–2001 Honda CR-V, built around carbon-fiber ceramic pads and drilled, slotted, zinc-plated rotors.
The Power Stop K15114DK is a bolt-on front and rear brake upgrade kit with carbon-fiber ceramic pads, drilled and slotted zinc-plated rotors, and premium stainless steel hardware. The pad formula is designed to run dust-free and quiet, the zinc-plated rotor finish resists rust and corrosion, and the drilled and slotted rotors help the brakes run cooler.
Key features
- Front and rear kit
- Carbon-fiber ceramic pads designed for low dust and quiet operation
- Drilled and slotted rotors
- Zinc-plated rotor finish that guards against rust and corrosion
- Premium stainless steel hardware
- Direct-fit, bolt-on design
Before you buy
Brake pads and rotors wear as a pair, so replacing both at the same time keeps braking even from pedal to wheel. A front and rear kit makes that easier to plan because the worn parts on both axles can be renewed in one job. Compare the pad material with how you drive. Ceramic compounds usually produce less dust than semi-metallic pads, but they can feel softer when cold, which matters for stop-and-go commuting.
Check the rest of the braking system before fitting new parts. Look at brake hoses for cracks, inspect the caliper slide pins for free movement, and check the fluid level and age. Clean the hub faces so the new rotors sit flat, and tighten the wheel lugs in a star pattern. Bed in the new pads with a series of moderate stops before normal driving.
- Replace pads and rotors together for even wear
- Inspect caliper slide pins during the job
- Check brake fluid condition and age
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K15114DK |
| Series | Z23 Evolution Sport |
| Fit type | Direct fit |
| Rotor design | Drilled and slotted |
| Rotor finish | Zinc-plated |
| Pad formula | Carbon fiber / ceramic |
| Hardware | Premium stainless steel |
Vehicle fitment
It fits 1997–2001 Honda CR-V models.
Newer CR-V generations and other Honda models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is meant as a bolt-on swap, with stainless hardware supplied so the clips and fasteners can be renewed with the pads and rotors.
What’s included
- Drilled, slotted and zinc-plated rotors
- Z23 Evolution Sport carbon-fiber ceramic brake pads
- Premium stainless steel hardware
Not included: Calipers.









