Overview
The Poison Spyder Customs Stock Crusher Corners (Bare Steel), part number 15-04-010, are full rear corner armor in 3/16″ plate steel for the 2004–2006 Jeep Wrangler (LJ).
The Stock Crusher Corners keep the factory wheel opening and fuel filler opening and include mounting holes for the factory equipment, such as the flares, tail light and license plate frame. Poison Spyder Customs laser cuts them from high strength plate and roll-forms them to the Jeep’s body lines. Every bolt hole is countersunk, and the supplied stainless steel flat head cap screws sit flush so the corner slides over rocks. The LJ is the longer-wheelbase Unlimited model, so these corners are matched to that body and are different from the ones made for the shorter TJ. The countersunk holes mean the screw heads sit flush with the steel, so there is nothing on the surface for a rock to catch. The Stock Crusher Corners are the version that keeps every factory opening, so the original flares, tail lights and license plate frame fit without further modification. Poison Spyder Customs has made them for the LJ body line, which differs from the TJ that shares the nameplate.
Key features
- Full corner armor for the LJ rear body
- Factory wheel and fuel filler openings
- Mounting holes for factory flares, tail light and license plate frame
- Laser cut from high strength 3/16″ plate steel
- Roll-formed to fit the body lines
- Countersunk bolt holes with stainless steel flat head cap screws
Fitting over rocks and body panels
Full corner armor changes how the rear quarter panel meets the trail. The steel covers the corner that takes the most rock contact, so the body panels behind it are protected from scrapes. Because the corners are cut to the body lines, check how they sit against the flares and tail light before drilling anything.
Cut and drilled edges are where bare steel starts to rust first. Deburr each hole, clean the cut edges and seal them with primer before the screws go in. Set the stainless screws so the heads sit flush, which keeps the surface smooth and reduces snag points on brush and rock.
- Test-fit before drilling
- Deburr and prime cut edges
- Keep screw heads flush for a smooth surface
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 15-04-010 |
| UPC | 614901726244 |
| Product type | Stock crusher corners (full rear corner armor) |
| Material | Steel plate, 3/16″ thick |
| Finish | Bare steel |
| Corner type | Full |
| Hardware | Stainless steel flat head cap screws |
| Fitment type | Direct fit |
| Installation type | Cutting or drilling required |
Vehicle fitment
Poison Spyder Customs lists part number 15-04-010 for the Jeep Wrangler (LJ) from 2004 to 2006, which is the Unlimited and Unlimited Rubicon long-wheelbase version.
The shorter TJ, the YJ and the JK have different bodies and are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Expect to cut or drill to fit these corners. Use the supplied stainless flat head cap screws in the countersunk holes so the surface stays smooth.
What’s included
Full stock-style crusher corners with stainless steel flat head cap screws.









