Overview
The Warrior S916 is a pair of black powder coat 12-gauge steel rear corners for the 1997-2006 Jeep Wrangler TJ and the 2004 Wrangler Unlimited (LJ). The manufacturer part number is S916, listed in Warrior as W/IS916, and these corners come without holes.
These rear corners have a material thickness of 1/8 inch and add structural support to the corner area while improving the vehicle’s appearance. They are steel without holes and come in pairs. Installation requires cutting or drilling.
Where the aluminum 916APC and other Warrior corners come with pre-cut openings, the S916 does not, which is the main reason to choose it. Steel at 12-gauge is a heavier material than the aluminum diamond plate corners, and the shipping weight Warrior reports for this part is not the weight of the corners themselves.
Key features
- 12-gauge steel rear corners
- Black powder coat finish
- Material thickness of 1/8 inch.
- Without holes
- Adds structural support to the rear corner area
- Supplied in a pair
- Cutting or drilling required for installation
Steel versus aluminum corners
Steel rear corners are heavier than aluminum diamond plate, and that extra mass can make a difference in how the rear of the vehicle feels on rough trails. Steel holds up well to impacts and does not dent as easily as thin aluminum. It does, however, need protection against rust, so keep the powder coat intact and touch up chips soon after they appear.
Because this version has no holes, you control the layout. Mark every opening and mounting point before cutting, and check clearance around the tail light, fuel filler and tailgate. Use a cutting method suited to steel and deburr the edges so they do not wear wiring or clothing. Recheck the fasteners after the first few drives.
Specifications
| Brand | Warrior |
|---|---|
| Part number | S916 |
| UPC | 70000212645 |
| Product type | Rear corners (corner guards) |
| Alternate part number | W/IS916 |
| Material | Steel, 12-gauge |
| Material thickness | 1/8 inch |
| Finish | Black powder coat |
| Corner type | Short |
| Holes | Without holes |
| Quantity | One pair |
| Fit type | Direct fit |
| Installation type | Cutting or drilling required |
Vehicle fitment
The S916 fits the 1997-2006 Wrangler TJ and the 2004 Wrangler Unlimited LJ.
- 2004 Jeep Wrangler (LJ) (Unlimited)
- 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
The S916 is for the 2004 Wrangler Unlimited (LJ) and the 1997-2006 Wrangler (TJ). Check your year, model and trim against this fit before buying.
Installation notes
This version has no holes, so the tail light and gas tank openings and the mounting holes must be cut or drilled during installation. The work suits an installer experienced with metal cutting tools.
What’s included
A pair of 12-gauge steel rear corners in black powder coat. Review the contents against your planned installation before you begin.









