Overview
The Warrior LED Light Resistor Kit, model 2905, is a universal resistor kit for turn signals after switching to LED bulbs. It is designed to address common turn signal issues that appear when automotive bulbs are changed to LED, and it slows light flashing.
The kit splices into the factory harness, so installation is a wiring job rather than a plug-in change. It is identified by model 2905 and UPC 634146029504.
Key features
- Universal fit
- Splices into the factory harness
- Slows turn signal flashing after an LED bulb change
- Designed for automotive bulbs changed to LED
Why LED turn signals flash fast
Turn signals work by sending current through the bulb, and the flasher reads that current to set the blink rate. LED bulbs draw far less current, so the flasher can read the circuit as a burned-out bulb and blink quickly. A resistor kit adds load to the circuit so the flasher sees the expected current and keeps its normal rate.
Before wiring a resistor kit, check that both front and rear turn signals are working and that the bulbs are seated correctly. Inspect the wiring for damage, since a poorly insulated splice can short or corrode. Some vehicles need a separate hyperflash or flasher unit, so check that the chosen solution fits the turn signal circuit you are working on.
- Check all turn signal bulbs first
- Insulate every splice
- Confirm the flasher type
- Test the signals before closing up
Specifications
| Brand | Warrior |
|---|---|
| Model | 2905 |
| UPC | 634146029504 |
| Function | Slows light flashing |
| Installation | Splices into the factory harness |
| Fit | Universal |
Vehicle fitment
It is universal fit, so it is not built for a specific year, make or model.
Check that the turn signal issue you are fixing matches what this kit addresses before wiring it in.
Installation notes
Because the kit splices into the factory harness, disconnect the battery before cutting or connecting any wires.
What’s included
The kit is a resistor kit. Check the number of resistors and any splice connectors against your installation before starting.
Not included: Have the LED bulbs ready before starting the wiring work.









