Overview
The Putco Plug and Play Resistor System, part number 240008, is an LED resistor system that stops OBC warnings and hyperflashing. It is a universal fit part.
Why LED lights trigger warnings
LED bulbs draw far less current than the incandescent bulbs a vehicle was designed around. The flasher relay and the body computer read that low draw as a bulb failure, which can make turn signals flash quickly or set a warning on the dash.
A resistor system adds a load to the circuit so the expected draw is restored. Resistors run warm, so mount them where airflow can reach them and away from wiring that could melt against them. Many owners replace the front and rear turn signal bulbs together so the circuit stays balanced.
Before installing, look over the existing wiring for chafing or corrosion at the bulb sockets. A resistor will not correct a poor ground or a failing flasher, so those should be checked first.
- Confirm which turn signal circuit the LED lights use
- Keep resistors clear of plastic trim and wiring
- Check sockets for corrosion before connecting
Specifications
| Brand | Putco |
|---|---|
| Part number | 240008 |
| Product type | LED resistor system |
| Purpose | Stops OBC warnings and hyperflashing |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit part, so no vehicle years, makes or models are attached to it. Confirm fit for your vehicle’s year, model and trim before ordering, and check the LED lights and turn signal circuit it will work with.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









