Overview
This G2 Axle and Gear pinion shim, UPC 682034252473, is a spacer shim for a pinion gear in a differential. Its thickness and exact application are unknown here, so confirm the size before fitting.
Measure the shim you are replacing before fitting a new one, since the vehicle, axle size and thickness must match your gear set.
Setting pinion depth
A pinion shim sets the position of the pinion gear relative to the ring gear. Correct depth and bearing preload keep the gear teeth making proper contact, which reduces noise and wear. Setting depth usually means measuring the old shim stack, then adjusting thickness until the gear pattern and preload meet the requirements for the gear set.
Pinion shims are often replaced along with the pinion bearings, crush sleeve or seal, depending on the design. Remove the old shim stack in one piece and keep each shim separate so the thickness can be verified. Bearings that show pitting or roughness should be replaced, not reused, when the pinion is being rebuilt.
- Measure the old shim stack
- Check bearing preload with a gauge
- Replace worn pinion bearings
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| UPC | 682034252473 |
| Type | Pinion shim |
Vehicle fitment
Pinion shims are matched to a particular gear set and axle. Confirm the application against your own ring and pinion before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The entry names a pinion shim and gives no quantity or thickness.






