Overview
The G2 Axle and Gear 15-SK17 is a pinion adjusting shim, a spacer placed behind the pinion to set its position in the carrier. Pinion setup sets gear depth and bearing preload together.
Measuring before you shim
Pinion shims are chosen by measurement, not by guessing. During setup the pinion depth is checked against the ring gear, then the bearing preload is confirmed, and the shim thickness is adjusted until both fall within the setup specification. Changing one usually means checking the other, so the pinion is rarely set once and left alone.
Shims are usually handled in sets during a rebuild, and the pinion bearings and crush sleeve often come out at the same time. Keep the original shim stack together and record its thickness before removing it, which gives a starting point if the new measurement is off. Wear on the gear teeth and a rough or loose pinion bearing are signs the setup needs attention.
- Record the original shim thickness before removal
- Replace the crush sleeve when the pinion is pulled
- Check the tooth contact pattern after each adjustment
- Keep shims clean and flat when stacking
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 15-SK17 |
| UPC | 682034187997 |
Vehicle fitment
Confirm the axle or carrier application for your vehicle before installing this shim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adjusting shims are chosen by measuring the pinion during setup, so set depth and preload before final assembly.
What’s included
Check the shim count and thickness against your pinion setup before starting.






