Overview
The Omix-ADA 18206.01 is a 6 degree spring wedge for the pinion and carrier shim group of differential parts. The angle is the key specification, so choose the wedge that matches the angle your setup calls for. It is sold as a universal fit wedge.
Setting up pinion angle
Pinion angle is the relationship between the pinion gear and the driveshaft, and it matters for driveline vibration and u-joint life. Spring wedges are one way to adjust that relationship when the rear axle or leaf springs have changed height or pinion position. Measuring the existing angle before any change gives you a baseline.
Wedges are usually installed between the axle and spring pad, so check that the spring pad and U-bolts are in good condition before fitting. Keep the wedge clean and dry so it seats flat against the spring pad. Re-torque the U-bolts after a short drive, and recheck the angle once the vehicle is at normal ride height. Worn bushings or sagging springs can change the angle over time, which may mean a wedge alone cannot restore the setup.
- Measure pinion angle before changing parts
- Inspect spring pads and U-bolts for wear
- Recheck angle at normal ride height
- Consider bushing and spring condition
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18206.01 |
| UPC | 804314075873 |
| Angle | 6 degree |
| Type | Spring wedge |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering. Check the 6 degree angle against the differential you are working on before installing this wedge.
Confirm your vehicle’s year, model and trim before ordering.






