Overview
The Oracle Lighting Waterproof Headlight Halo Kit in ColorSHIFT (model 3943-330) gives 07-Current Wrangler JK, 2 & 4 Door owners color-shifting halo rings for the turn signals. The rings are built to mount on the outside of the vehicle.
Oracle’s IP67 rating comes from the resin injection around the SMD halos, which the company says lets the kit work in any weather. Each ring runs on 12V and works with the turn signal harness, a controller or a switch, so the halo can serve as a working turn signal.
Key features
- ColorSHIFT halo rings built on SMD (surface mount diode) technology
- Resin injected, IP67 waterproof
- External wide-voltage LED drivers
- Genuine 3M VHB adhesive for mounting
- Quick connect wiring adapters
- Halo ring attached directly to the lens surface
Color changes and placement
ColorSHIFT rings change color, which makes them a visible styling choice on the JK. Placement matters for both looks and visibility: the rings sit on the outer turn signal housing, so their glow shows from the front and side. Think about how the color appears in daylight as well as at night before settling on a setup.
Because the halos mount with adhesive, the mounting surface matters more than on a bolt-on part. Wipe away oil, wax and dust, and let the surface dry before pressing the rings firmly in place. Route the adapter cables so they are not pinched by the hood or the fender liner, and secure loose cable with clips.
- Test the color settings in daylight and at night
- Keep cables clear of moving and hot parts
- Recheck ring adhesion after the first week
Specifications
| Brand | Oracle Lighting |
|---|---|
| Model | 3943-330 |
| UPC | 394333020164 |
| Color | ColorSHIFT |
| Light type | SMD halo rings |
| Waterproof rating | IP67, resin injected |
| Power | 12V |
| Adhesive | Genuine 3M VHB |
| Warranty | Lifetime LED warranty |
Vehicle fitment
Model coverage is 07-Current Jeep Wrangler JK, both 2-door and 4-door versions.
Only the JK generation is named, so JL, JT and older TJ or LJ Wranglers are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rings use genuine 3M VHB adhesive, so the mounting surface should be clean and free of oil before you press the rings on. Connect the quick connect adapters to the turn signal harness, or to a controller or switch if you want independent control of the halos.
What’s included
The kit includes SMD halo rings, external LED drivers, quick connect wiring adapters and 3M VHB adhesive. A separate controller or switch is needed only if you want independent control of the halos.









