Overview
The Oracle Lighting Waterproof Fog Light Halo Kit (Amber), part 1243-333, is a pair of amber halo rings for the 2007–2018 Jeep Wrangler JK, in both 2-door and 4-door models. The rings install on the outside of the fog lights to add an amber halo around each light.
The halos use ORACLE SMD LEDs that are resin injected for an IP67 waterproof rating and operate in all weather conditions. It is 12V powered, uses a minimal amount of power, and can be wired to a controller, a switch or a parking light harness. It can also be wired to a turn signal harness to work as a full functioning turn signal.
Key features
- Amber halo rings sold as a pair for the driver and passenger side fog lights
- Resin injected construction for an IP67 waterproof rating
- Designed to operate in all weather conditions
- 12V powered and uses a minimal amount of power
- Can be wired to a controller, switch or parking light harness
- Light output described by the maker as bright and brilliant
- Mounts on the outside of the fog lights with supplied extra strength 3M self-adhesive tape
Turn signal and halo wiring
Halo rings can run as plain accent lights or be tied into the turn signal circuit, and the wiring choice changes how they behave. A switch gives simple on and off control, while a controller can add flash or dimming patterns. Tying the halos to a turn signal harness changes the signal timing, so confirm that the vehicle’s flasher still works and that the rear indicators respond as expected before driving.
Amber is the common choice for turn signal style halos, but local rules on lamp color and use still apply, so check them before road use. Keep the wiring on a fused circuit, route it away from exhaust heat and moving parts, and inspect connectors after off-road trips where water and mud can get in.
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 1243-333 |
| UPC | 124333320168 |
| Color | Amber |
| Waterproof rating | IP67 (resin injected) |
| Voltage | 12V |
| Quantity | Sold as a pair (driver and passenger side) |
| Mounting | Outside of the fog lights, 3M self-adhesive tape |
Vehicle fitment
The kit fits 07-Current Wrangler JK, 2 and 4 door models, which corresponds to 2007–2018 Jeep Wrangler (JK).
Other Wrangler generations, including the TJ, LJ and JL, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the halos to the outside of the fog lights with the supplied 3M tape, then wire the kit to a controller, switch or parking light harness through a fused circuit. Check local rules on auxiliary and halo lighting before road use.
What’s included
A pair of amber halo rings for the driver and passenger fog lights, and the supplied extra strength 3M self-adhesive tape.
Not included: the fog lights the halos mount onto, and any controller or switch you choose to use for wiring.









