Overview
Blue halos are the point of the Oracle Lighting 3943-002, a waterproof headlight halo set for the 2007-2018 Jeep Wrangler JK in 2-door and 4-door form. Each ring mounts on the outside of the turn signal, which is where Oracle designed the kit to install, so the blue light shows around the lamp when powered.
The set uses resin injected SMD rings rated IP67 for waterproofing, and Oracle states they keep working in every weather condition. Power is 12V, and the set can be triggered from a controller, a switch, or the turn signal harness, which lets it act as a working turn signal.
Key features
- Blue SMD (Surface Mount Diode) halo rings
- IP67 waterproof rating from resin injected construction
- Wide voltage external LED drivers
- Genuine 3M VHB adhesive backing for mounting
- Quick connect wiring adapters
- Installs without cutting.
- Low power draw, per Oracle’s description
- Lifetime LED warranty
Blue halos at night
Blue halos are a bold accent that shows most clearly after dark, when the glow stands out around the turn signal. Because the light is visible from the side and front, the ring brightness and the quality of the mounting both matter. Blue LEDs can look different on tinted lenses, so judge the look on the actual housing before finalizing placement.
Adhesive-mounted halos rely on a clean, dry surface to stay put through washing and off-road bumps. After mounting, keep the wiring off moving parts and seal any splice you make with heat shrink or a weatherproof connector. Inspect the rings after the first few rough trips, looking for lifting edges or cable chafe.
- Test the glow before final mounting
- Use weatherproof splices and connectors
- Recheck ring edges after rough trips
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 3943-002 |
| UPC | 394300220160 |
| Halo color | Blue |
| Light type | SMD (Surface Mount Diode) halo |
| Waterproof rating | IP67 |
| Power | 12V, wide voltage external LED drivers |
| Mounting | 3M VHB adhesive backing |
| Warranty | Lifetime LED warranty |
| Fitment type | Direct fit |
Vehicle fitment
Coverage runs from 2007 through 2018 for the Jeep Wrangler JK, in both 2-door and 4-door form. It is a direct fit kit, mounted on the outside of the turn signal.
Wrangler JL and JT models, along with older TJ and LJ Wranglers, fall outside the wording used here.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adhesive mounting means the rings bond to the turn signal housings, so surface preparation matters before pressing them on. Wire them through the quick connect adapters to whichever controller, switch or turn signal harness connection you choose. Check local rules on modified lighting before driving with the blue halos lit.
What’s included
The kit includes the blue halo rings, external LED drivers, quick connect adapters and adhesive backing.
Not included: A controller, switch or relay would be a separate purchase.









