Overview
The Oracle Lighting Waterproof Headlight Halo Kit in ColorSHIFT WiFi (model 3943-331) is a set of SMD halo rings for the 07-Current Wrangler JK, 2 & 4 Door. The rings install on the outside of the turn signals, and the kit requires no cutting.
Each ring is 12V powered and can be wired to a controller, a switch, or directly to the turn signal harness. That wiring allows the halo to work as a full functioning turn signal. The kit uses wide-voltage external LED drivers for power.
Key features
- SMD (surface mount diode) halo rings with ColorSHIFT WiFi lighting
- Resin injected construction rated IP67 waterproof
- Wide voltage external LED drivers
- Genuine 3M VHB adhesive backing for mounting
- Quick connect wiring adapters
- SMD halo ring attached to the lens surface
- Draws a small amount of power.
Choosing a wiring route
The halo rings can run as an always-on accent, switch on separately, or join the turn signal circuit. Each route changes how much wiring you handle and how the lights behave when you signal. Settle on that route before splicing, so the connectors and switch position fit the plan.
A WiFi-controlled color kit needs a stable power source and a clean mounting surface. Keep the drivers mounted where air can move around them, and route the cables away from the wheel well and steering linkage. Before driving with the halos lit, confirm the color and brightness settings do not distract other drivers or conflict with local lighting rules.
- Decide on the wiring route before splicing
- Keep LED drivers away from direct heat
- Check local rules for colored lighting
Specifications
| Brand | Oracle Lighting |
|---|---|
| Model | 3943-331 |
| UPC | 394333120161 |
| Color | ColorSHIFT WiFi |
| Light source | SMD (surface mount diode) halos |
| Waterproof rating | IP67, resin injected |
| Power | 12V |
| Drivers | Wide voltage external LED drivers |
| Mounting | Genuine 3M VHB adhesive backing |
| Wiring | Quick connect wiring adapters |
| Warranty | Lifetime LED warranty |
Vehicle fitment
Fits 07-Current Jeep Wrangler JK models, both 2-door and 4-door.
The Wrangler JK is the only generation named, so JL, JT and older TJ or LJ Wranglers are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The halo rings bond to the turn signal housings with genuine 3M VHB adhesive, so clean and dry the surface and press each ring firmly in place before the adhesive sets. Choose one wiring route: the quick connect adapters can join the halos to the turn signal harness, or to a controller or switch for separate control. Check local rules on added lighting before use.
What’s included
Oracle describes SMD halo rings with external LED drivers, quick connect wiring adapters and genuine 3M VHB adhesive backing. The listed contents do not include a controller or switch, which the halos can be wired to.









