Overview
The Oracle Lighting Waterproof Headlight Halo Kit in amber (model 3943-333) adds amber SMD halo rings to the 07-Current Wrangler JK, 2 & 4 Door. The rings mount on the outer turn signal housings.
Because the rings are resin injected, Oracle rates them IP67 waterproof and says they hold up in all weather when mounted outside. Each ring runs on 12V and can be wired to a controller, a switch, or the turn signal harness.
Key features
- Amber SMD (surface mount diode) halo rings
- Resin injected construction with an IP67 waterproof rating
- Wide voltage external LED drivers
- Genuine 3M VHB adhesive backing
- Quick connect wiring adapters
- Halo ring attached to the lens surface
Amber lighting and daily use
Amber halos are a turn signal look that stands out in daylight, and the warm color is easy to see from a distance. The rings sit on the outside of the turn signal housing, so they are exposed to road spray, washing and sun. Choosing a color that matches your signal use helps keep the look consistent when you drive.
Adhesive mounts need clean surfaces, and amber rings are no exception. Remove wax and fingerprints before pressing the backing down, then let the bond set undisturbed. Check the wiring path for rubbing against moving parts, and keep the connectors away from standing water in the fender area.
- Check ring adhesion after a few car washes
- Keep cables away from moving parts
- Confirm local rules on amber lighting before wiring
Specifications
| Brand | Oracle Lighting |
|---|---|
| Model | 3943-333 |
| UPC | 394333320165 |
| Color | Amber |
| Light type | SMD halo rings |
| Waterproof rating | IP67, resin injected |
| Power | 12V |
| Mounting | Genuine 3M VHB adhesive backing |
| Warranty | Lifetime LED warranty |
Vehicle fitment
The kit covers 07-Current Wrangler JK vehicles, 2-door and 4-door alike.
Only the JK generation is named here, so JL, JT and older TJ or LJ Wranglers are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Clean the turn signal surface where each amber ring will sit, then press the 3M VHB backing down firmly. Use the quick connect adapters to tie the rings into the turn signal harness or into a controller. Confirm local rules on amber lighting before you wire the rings to run as turn signals.
What’s included
The kit includes amber SMD halo rings with external LED drivers, quick connect wiring adapters and 3M VHB adhesive backing. Plan to supply a controller or switch separately if you want independent control of the halos.









