Overview
Oracle Lighting’s green halo kit, part 3943-004, is made for the 2007 to 2018 Jeep Wrangler JK in two-door and four-door bodies. The waterproof SMD rings sit on the outside of the turn signals, which is where Oracle designed them to install.
The kit runs on 12V power and can be triggered by a controller, a switch or the turn signal harness, so the rings can also show turn signal activity. The resin injected SMD rings are rated IP67 waterproof for outdoor mounting.
Key features
- Green SMD (Surface Mount Diode) halos
- Resin injected IP67 waterproof coating
- Wide voltage external LED drivers
- Genuine 3M VHB adhesive backing
- Quick connect adapters for wiring
- Designed for installation with no cutting
- Lifetime LED warranty from Oracle
Before you install halos
Halo rings sit close to the headlight housing, where heat, road spray and vibration build up over time. Before mounting, clean the surface with a solvent and let it dry fully, because adhesive backing holds best on a dry, grease-free area. Run the wiring and power the rings before pressing them in place, so you can confirm each one lights correctly.
The trigger choice affects how the rings behave. Tying them into the turn signal harness makes them flash with signaling, while a separate controller or switch lets you run them as steady accents. Many owners add a fuse on the power feed for protection. Inspect the rings every few months for loose edges or fogging, and re-seat any that lift. Keep spare clips and a few spare adapters on hand in case a connection needs redoing.
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 3943-004 |
| UPC | 394300420164 |
| Halo color | Green |
| Light type | SMD (Surface Mount Diode) halo |
| Waterproof rating | IP67 |
| Power | 12V, wide voltage external LED drivers |
| Mounting | 3M VHB adhesive backing |
| Warranty | Lifetime LED warranty |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2007 to 2018 Jeep Wrangler JK in two-door and four-door bodies.
Older TJ and LJ Wranglers and newer JL and JT models are not covered by that wording.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the green rings with the 3M VHB backing, then wire them through the quick connect adapters to the controller, switch or turn signal harness connection you pick. Oracle says no cutting is needed for installation. Before driving with colored halos lit, check your local rules for modified lighting.
What’s included
The described contents are green SMD halo rings, external LED drivers, quick connect adapters and genuine 3M VHB backing tape.
Not included: Add a controller, switch or relay separately if your wiring setup needs one.









