Overview
The Oracle Lighting 3943-001 is a white waterproof headlight halo kit for the Jeep Wrangler JK, 2-door and 4-door, from 2007 through 2018. Its SMD halo rings mount on the outside of the turn signals, so the white glow sits around the lights when the kit is powered.
Oracle built the rings with resin injected SMD construction and an IP67 waterproof rating, and says they operate in all weather conditions. The kit runs on 12V and can be wired to a controller, a switch, or directly to the turn signal harness, which lets the halos work as a full functioning turn signal.
Key features
- White SMD (Surface Mount Diode) halo rings
- Resin injected IP67 waterproof coating
- Wide voltage external LED drivers
- Genuine 3M VHB adhesive backing
- Quick connect wiring adapters
- Installs with no cutting required
- Draws only a small amount of power.
- Offered with a lifetime LED warranty
Setting up white halos
White halos give the JK a clean, factory-style accent when the turn signals are off, and they are easy to pair with most body colors. The rings mount on the outer turn signal, so position them carefully, since off-center mounting is more noticeable in daylight than at night. Set the rings in place dry, then check the alignment from several angles before pressing the adhesive firmly.
Care is simple, but the mounting surface and wiring deserve attention. Wipe the lens with mild soap and water, avoid abrasive pads that can cloud the surface, and check that the adapter cables stay clear of the hood latch and the fender liner. Replacing a damaged connector early avoids intermittent lighting.
- Check alignment before the adhesive sets
- Keep cables clear of the hood latch
- Inspect connectors after rough trips
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 3943-001 |
| UPC | 394300120163 |
| Halo color | White |
| Light type | SMD (Surface Mount Diode) halo |
| Waterproof rating | IP67 |
| Power | 12V, wide voltage external LED drivers |
| Mounting | 3M VHB adhesive backing |
| Warranty | Lifetime LED warranty |
| Fitment type | Direct fit |
Vehicle fitment
The kit covers 2007 through 2018 Jeep Wrangler JK models, including 2-door and 4-door versions. It is a direct fit kit, with the rings mounting on the outside of the turn signals.
Because the kit names only the JK generation, JL, JT, TJ and LJ Wranglers should look for a different kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rings are fixed with 3M VHB adhesive, and Oracle says no cutting is required. The quick connect wiring adapters link the halos to the power source you choose. Clean the mounting surface before pressing the rings in place, and check local rules on modified headlight and turn signal lighting before driving with them lit.
What’s included
The kit description names white SMD halo rings, external LED drivers, quick connect wiring adapters and 3M VHB adhesive backing.
Not included: A controller or switch, if you want one, is a separate part.









