Overview
The Oracle Lighting 1243-001 is a white halo ring kit for Jeep Wrangler JK fog lights, sold as a pair so the driver and passenger sides match. The halos use ORACLE SMD LEDs inside a resin injected body and fit 07-Current Wrangler JK models with 2 and 4 doors.
The halos are IP67 waterproof and designed to operate in all weather conditions. The kit runs on 12V with minimal power draw and can be wired to a controller, a switch or a parking light harness for the lighting pattern you want.
Key features
- White halo rings, supplied as a pair for driver and passenger fog lights
- Resin injected for an IP67 waterproof rating
- 12V powered with minimal power draw
- Wiring options: controller, switch or parking light harness
- Extra strength 3M self-adhesive tape included
- Designed to install on the outside of the fog lights
Choosing a wiring method
Halo rings are a visual addition, so their effect on the vehicle comes mostly from wiring. Many owners run them from a switch so they turn on with the fog lights, while others prefer a controller that offers flash or dimming patterns. A parking light harness ties the halos to the running lights, which is a common choice for daytime visibility on a Wrangler JK. Pick the control method before cutting any wire, because it decides where the splice goes and how much of the factory harness you need to tap.
Adhesive mounting works well on smooth fog light housings but depends on clean surfaces. Wipe the area with isopropyl alcohol, let it dry fully, and press the tape firmly while it bonds. Inspect the rings after rough trails or car washes, looking for lifted tape, cloudy resin or moisture near the edge. Replacing a worn connector is often simpler than chasing a flicker through a long wiring run.
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 1243-001 |
| UPC | 124300120166 |
| Color | White |
| Light type | Halo ring, ORACLE SMD halos |
| Voltage | 12V |
| Waterproof rating | IP67, resin injected |
| Quantity | Pair |
| Mounting | Extra strength 3M self-adhesive tape |
| Illumination | Illuminated |
| Fitment type | Direct Fit |
Vehicle fitment
It fits 07-Current Wrangler JK, 2 and 4 door models, which corresponds to 2007–2018 Jeep Wrangler (JK). The rings mount on the turn signals, so confirm the mounting spot on your vehicle before fitting.
Wrangler JL and later models are not part of the JK range named here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting uses the supplied extra strength 3M self-adhesive tape rather than hardware. Use fused wiring to the controller, switch or parking light harness, and check local rules on lamp color before driving on public roads.
What’s included
The kit includes the white halo rings, supplied as a pair, and the extra strength 3M self-adhesive tape.
Not included: A controller, switch or wiring harness is needed for the wiring options, and none is included with the kit.









