Overview
The Omix-ADA 18204.01 is an axle U-bolt, part number 18204.01, that Omix-ADA presents as a direct OE replacement Jeep part. Omix-ADA backs this U-bolt with a limited five year manufacturer warranty.
Inspecting the axle U-bolt
The U-bolt wraps around the axle housing and passes through a mounting plate, so it holds the axle to the leaf spring under constant road load. The threads and the bends see the most stress. Look for stretched or flattened threads, cracks near the bends, and rust working between the bolt and the axle. Any of these signs means the clamp is no longer holding evenly and the bolt should be replaced.
When one U-bolt is replaced, check the rest of the set and the mounting plates at the same time. Worn plates can let the clamp shift, which makes a new bolt wear quickly. Tighten the nuts evenly in a cross pattern, and recheck them once the first miles of driving are behind you, since the spring seats and the clamp settles after installation. Keeping the whole assembly in good order makes the axle connection more reliable over time.
- Check threads for stretching or flat spots
- Look for cracks at the bends
- Inspect mounting plates for wear
- Recheck nut tightness after initial driving
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18204.01 |
| UPC | 804314009892 |
| Type | Axle U-bolt |
| Warranty | Limited five year manufacturer warranty |
Vehicle fitment
It is a Direct Fit Jeep replacement part. Confirm fit for your vehicle’s year, model and axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.








