Overview
The Point Spring and Drive Shaft Co. 8130370 is a large U-bolt with nuts, sized for Jeep front axles. It fits Model 25, 27 and 30 front axles and has a 1/2 inch thread, a 7 inch length and a 3-1/4 inch inside diameter.
Applications cover 1972 to 1995 Jeep YJ and CJ models with a Model 30 front axle, and 1945 to 1971 CJ models with a Model 25 or 27 front axle. Confirm your year and front axle model before fitting, since the year ranges overlap with other CJ coverage.
Key features
- Large U-bolt design for front axle mounting
- Includes washers and nuts
- Inside diameter of 3-1/4 inch
- Front axle applications on Model 25, 27 and 30 axles
Measuring and choosing a front U-bolt
A front U-bolt clamps the axle to the leaf spring, so the thread size, length and inside diameter all need to fit the axle housing and spring together. Measure the existing U-bolt across the legs and the thread before buying. Matching the axle model matters more than matching the year, since the same body style can use different front axles.
On older CJ and YJ axles, the spring seat and pad often show wear that makes a new U-bolt feel loose even when the fit is correct. Inspect those seats, replace worn pads, and clean threads before tightening. Tighten the nuts evenly in stages and recheck them after the first few drives, since clamp force settles as the spring bedding compresses.
Older front axles can have worn bushings and seats, so the clamp may feel loose even when the U-bolt is correct. Inspect the spring pad, check the axle seat for wear, and replace the nuts if the threads look stripped.
Specifications
| Brand | Point Spring And Drive Shaft Co. |
|---|---|
| Part number | 8130370 |
| UPC | 70000363902 |
| Thread diameter | 1/2 inch |
| Length | 7 inches |
| Inside diameter | 3-1/4 inch |
| Front axle models | Model 25, 27 and 30 |
| Included hardware | Washers and nuts |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers 1959–1983 Jeep CJ5 (several trims), 1959–1975 Jeep CJ6, 1976–1986 Jeep CJ7, 1981–1985 Jeep Scrambler and 1987–1995 Jeep Wrangler (YJ).
Coverage runs from 1959 for CJ5, CJ6, CJ7, Scrambler and Wrangler YJ models, and the earlier CJ years apply to other axle models. Confirm your year, model and trim before ordering.
Installation notes
Confirm the front axle model before fitting. Model 30 axles suit the 1972 to 1995 YJ and CJ models, while Model 25 or 27 axles suit earlier CJ models.
What’s included
Washers and nuts are included, and the U-bolt is supplied as a single item.
Not included: Check the package contents for any plate or other hardware you need before installing.












