Overview
The Omix-Ada bearing retainer, part number 18880.03, is a front-position manual transmission bearing retainer for T86 and T90 transmissions in 4 cylinder applications. Omix-Ada builds it as a direct OE replacement part to the original specifications for Jeep vehicles.
Fitment covers Jeep CJ, Willys, Commando, Jeepster, Utility, DJ and FC models from 1946 to 1971, so match the years and models below to your vehicle.
Key features
- Direct OE replacement design, built to original specifications by Omix-Ada
- Front position mounting
- Application notes name T86 and T90 transmissions
- Application notes name a 4 cylinder engine
- Covered by a limited five year manufacturer warranty
Replacing a bearing retainer
A bearing retainer holds the transmission’s front bearing in place and seals the bearing bore, so wear here can show up as leaking oil or a bearing that moves under load. The retainer usually comes out when the transmission is apart for bearing or input shaft service.
Because the retainer is tied to the bearing and seal, many rebuilds replace the seal and check the bearing at the same time. Clean the mounting surface on the case and inspect the bore for scoring before fitting a new retainer. Follow the sealant and torque steps in the rebuild procedure you are using.
- Inspect the bearing bore for scoring
- Replace the front seal during the same job
- Clean the case mounting surface before fitting
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18880.03 |
| UPC | 804314009687 |
| Position | Front |
| Fitment type | Direct fit |
| Transmission applications | T86 and T90 |
| Engine application | 4 cylinder |
| Warranty | Limited five year manufacturer warranty |
Vehicle fitment
Fitment is listed by the manufacturer for these Jeep models: 1959–1960 and 1968–1971 CJ3, CJ5 and CJ6 (Base); 1967 Commando (Base); 1959–1960 and 1968 DJ3 and DJ6 (Base); 1957–1958 F4; 1958–1966 FC150; 1964–1966 FC170; 1967–1971 Jeepster (Base, Commando); 1961–1962 Utility; 1947–1955 Willys 1-Ton; 1946–1949 Willys CJ-2; 1949–1958 Willys CJ-3; 1955–1958 Willys CJ-5; 1956–1958 Willys CJ-6; 1956–1958 Willys DJ-3; 1949–1952 Willys Jeepster; 1946–1950 Willys Panel; and 1951–1955 Willys Sedan Delivery.
Later CJ-7 and Wrangler models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









