Overview
The Omix-Ada 17114.29 is a lower radiator hose for 4.0L six-cylinder 2001–2006 Jeep Wrangler (TJ) models, including Rubicon and Sahara trims.
It returns cooled coolant from the bottom of the radiator to the engine. It is a direct fit build made to original specifications and fits six TJ trims.
Key features
- Lower position hose for the 4.0L six-cylinder
- Fits six 2001–2006 TJ trims.
- Direct fit build to original specifications
- Limited five year manufacturer warranty
TJ cooling system upkeep
The lower radiator hose on a TJ works under constant temperature swings, so its ends can harden and the clamps can loosen over years of service. Inspect the hose each time the radiator cap or the thermostat is serviced, and look for bulges near the radiator neck, cracks along the length and any seepage at the clamps.
Trail use adds stress. Water crossings, rocks and jarring can shift hoses and rub them against brackets or the frame. Route the hose away from sharp edges during installation and check for chafing after off-road trips.
When the old hose comes out, check the radiator outlet and the engine water pump inlet for corrosion or residue, and clean the mating surfaces before connecting the new hose. Refill with a suitable coolant mix and recheck for leaks after the engine warms up.
- Inspect clamps at each oil change
- Watch for chafing after trail use
- Recheck coolant level after the first drive
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17114.29 |
| UPC | 804314252175 |
| Engine | 4.0L 6 cylinder |
| Position | Lower |
| Type | Lower hose |
| Fitment type | Direct fit |
| Warranty | Limited five year manufacturer warranty |
Vehicle fitment
It fits this Jeep model:
- 2001–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
It does not fit the 1997–2000 TJ years or the 2007–2018 Wrangler (JK). Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
Only the lower hose is included; clamps and other parts are not part of it. Check the package contents against your installation before starting.









