Overview
The Omix-ADA 18017.02 is a steering shaft U-joint for 1972 to 1975 Jeep CJ5 and CJ6 models. It is designed to original Jeep specifications and comes with a limited five year warranty.
The manufacturer fitment list shows the CJ5 in Base and Renegade trims and the CJ6 in Base trim, as shown below.
Key features
- Designed to original Jeep specifications
- Steering shaft U-joint replacement
- Direct fit per the manufacturer list
- Limited five year warranty
Checking the steering shaft joint
A steering shaft U-joint lets the shaft turn through an angle, so the wheel can drive the steering gear even when the column and gear are not perfectly in line. On older Jeeps, the joint is one of the main points of play in the steering. Worn joints feel like a loose or wandering wheel, and they can make the front end harder to keep straight.
When replacing a U-joint, check the rest of the shaft and the column mounts too. Look for rust, cracks and any sign of binding as the shaft turns. Joints should be replaced in matched pairs when both show wear, and the shaft alignment should be marked before the old joint comes off.
- Play at the wheel before the front wheels respond
- Binding or stiffness when turning slowly
- Rust or cracks around the joint yoke
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18017.02 |
| UPC | 804314040482 |
| Type | Steering shaft U-joint |
| Warranty | Limited five year warranty |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list shows 1972–1975 Jeep CJ5 (Base, Renegade) and 1972–1975 Jeep CJ6 (Base).
The list does not include the 1976 and later CJ5 or any CJ7. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare joint size and shaft ends with the old U-joint before fitting; no dimensions are listed.
What’s included
Steering shaft U-joint, part number 18017.02.









