Select your vehicle

Front Driver Side Fender Flare

Omix-Ada

Shop Jeep CJ5 Fender Flares on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement front driver side (left) flare, Omix-Ada part 11601.03
  • Fits Jeep CJ5, CJ6, CJ7 and Scrambler models, 1955–1986
  • Single flare for replacing one side at a time
  • UV-treated thermoplastic, direct fit

Description

Overview

The Omix-Ada 11601.03 is a single front driver side (left) replacement fender flare, listed under Omix-Ada part number OAI11601.03, for Jeep CJ5, CJ6, CJ7 and Scrambler models and the Willys CJ-5 and CJ-6. The model years run from 1955 to 1986 across the listed trims.

Each flare is made from UV-treated thermoplastic that Omix-Ada describes as hard-wearing and durable. Omix-Ada offers single replacements so that one damaged flare can be swapped without replacing the full set, and this part is the left side only.

Key features

  • Front left position, the driver side on the listed models
  • Single replacement flare, left side only
  • UV-treated thermoplastic construction
  • Designed to fit the factory mounting holes
  • Covers CJ5, CJ6, CJ7, Scrambler and Willys CJ-5 and CJ-6 models

Single-side replacement on older Jeeps

Replacing one flare on an older Jeep is common when a single side has been bent in a trail mishap or worn through at the edge. Match the new flare to the side of the damaged one, and check that the surrounding paint and metal are sound. Replacing one side alone can leave a visible difference in color or shape, so compare the two sides in good light before fitting.

Look for rust around the mounting holes and along the fender lip, since moisture trapped behind a flare can spread quickly. Clean any surface rust and treat it before the new flare goes on. Taking a few minutes to inspect the opposite side also shows whether it needs attention soon.

  • Match the side of the damaged flare
  • Compare color and shape in good light
  • Treat rust around the mounting holes

Specifications

Brand Omix-Ada
Part number 11601.03 (Omix-Ada part number OAI11601.03)
UPC 804314037109
Position Front left (driver side)
Quantity One flare
Material UV-treated thermoplastic
Fitment type Direct fit

Vehicle fitment

It fits the 1959–1983 Jeep CJ5, the 1966–1968 Jeep CJ5A, the 1959–1975 Jeep CJ6, the 1966–1968 Jeep CJ6A, the 1976–1986 Jeep CJ7, the 1981–1985 Jeep Scrambler, and the 1955–1958 Jeep Willys CJ-5 and CJ-6.

CJ3 and Willys CJ-3 models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

The flare is designed to fit the factory mounting holes. On an older vehicle with rusted factory hardware, some hole modification may be needed.

What’s included

One replacement front left fender flare.

SKU: OAI11601.03 Category:

Specification

Shipping weight 1.30 lbs
Package dimensions 38.00 × 4.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep CJ51959–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ5A1966–1968Base
Jeep CJ61959–1975Base
Jeep CJ6A1966–1968Base
Jeep CJ71976–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade
Jeep Scrambler1981–1985Base, Laredo, Renegade, SL, SR
Jeep Willys CJ-51955–1958All
Jeep Willys CJ-61956–1958All

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 11601.03 fit a 1970 Jeep CJ5?

Yes. It fits the 1959–1983 Jeep CJ5, and 1970 falls inside that range. The Base, Golden Eagle, Laredo, Limited and Renegade trims are covered for that model, so confirm your trim before ordering.

Is this a left or a right flare?

It is the front left flare, which is the driver side on the listed models. The passenger side flare is listed separately as part 11601.02, so you will need that part for the other side.

Can I replace just one flare?

Yes. This is a single replacement flare, so one damaged side can be replaced without changing the other side of the vehicle.

Should both flares be replaced at the same time?

Not always. If the other flare is sound and fits well, it can stay on. Replacing both at once gives an even look and makes it easier to match the body lines, so it is worth considering if the other side shows wear or rust.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep CJ5 Fender Flares on Amazon