Overview
It is a front lower ball joint for Dana 30 Standard front axles. It fits the 1972–1983 Jeep CJ5, 1972–1975 CJ6, 1976–1986 CJ7, 1981–1985 Scrambler, 1974–1983 Wagoneer (SJ) and 1984–1991 Grand Wagoneer (SJ).
It is built to original specifications as a direct OE replacement, with a limited five-year warranty. It includes a nut and a grease fitting.
Key features
- Front lower position
- Dana 30 Standard axle type
- Lubeable joint
- Includes nut and grease fitting
Greasing and care for CJ joints
On a Dana 30 Standard front axle, the lower joint carries weight from the axle and takes repeated shock from trail use, so it is one of the first front-end parts to show play on an older Jeep. Greasing through the fitting at routine service keeps the seal supple and pushes out moisture and grit.
Use a grease gun slowly until the boot just begins to swell, then wipe away excess so dirt does not stick to it. Tie rod ends and the upper joint are usually inspected in the same session, since they share the load and wear together on these front ends.
- Grease at routine front-end service
- Stop when the boot just begins to swell
- Inspect tie rod ends during the same job
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18038.01 |
| UPC | 804314040314 |
| Position | Lower (front) |
| Axle type | Dana 30 Standard |
| Lubeable | Yes |
| Included | Nut and grease fitting |
Vehicle fitment
It fits these vehicles:
- 1972–1983 Jeep CJ5 and 1972–1975 CJ6
- 1976–1986 Jeep CJ7
- 1981–1985 Jeep Scrambler
- 1974–1983 Jeep Wagoneer (SJ)
- 1984–1991 Jeep Grand Wagoneer (SJ)
Wrangler, Cherokee and Grand Cherokee models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Included: One nut and one grease fitting.









