Overview
The Crown Automotive 998710K is a steering shaft coupler kit with a 3/4-inch, 36-spline coupler. The kit includes the coupler, a boot, two bushings, a bushing clip and an inner spring clip.
Key features
- Coupler with a 3/4-inch, 36-spline fitting
- Includes the boot and two bushings
- Bushing clip and inner spring clip included
- All listed coupler parts in one kit
Checking the steering shaft
A steering shaft coupler joins the column to the steering box and absorbs small misalignments between the two. Its boot keeps grease in and dirt out, and the bushings control play in the joint. Over time the bushings and clips can loosen, and a torn boot lets grit reach the working surfaces.
Before replacing the coupler, check the steering wheel for play and inspect the shaft for wear at the spline. Keep the bushing clip and inner spring clip seated correctly, since they hold the coupler in place. When the old coupler is removed, clean the shaft and check that the new coupler slides on without forcing.
- Check the coupler for play by hand
- Inspect the boot for tears or grease leaks
- Confirm clips are seated before tightening
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 998710K |
| UPC | 848399078473 |
| Coupler size | 3/4 inch |
| Spline | 36 |
| Included | Coupler, boot, two bushings, bushing clip, inner spring clip |
Vehicle fitment
No vehicle years, models or trims are listed. Match the 3/4-inch, 36-spline size to your steering shaft before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The coupler, boot, two bushings, a bushing clip and an inner spring clip.
Not included: The steering column and shaft are not part of this kit.









