Overview
The Omix-Ada starter solenoid, part number 17230.01, is a 12-volt replacement solenoid with 3 terminals, designed for 4 cylinder engines in older Jeep CJ and Willys models.
It fits 1955 to 1960 and 1966 to 1971 Jeep CJ3, CJ5 and CJ6 vehicles, along with 1955 to 1958 Willys models. Confirm your model year against these years before ordering.
Key features
- Starter solenoid for 12-volt systems only
- 3 terminals for connections
- Designed for 4 cylinder engines
- It fits Jeep CJ3, CJ5, CJ6, Willys and M38A1 models.
- Direct fit replacement
Starter solenoid basics
A starter solenoid acts as a switch and a pushrod: it closes the high-current circuit to the starter motor and moves the drive pinion into the flywheel. Because it handles heavy current, its contacts can burn or corrode, and loose connections can cause the same symptoms as a failed solenoid.
When troubleshooting, check battery voltage and clean the terminals and ground connections first. A multimeter can confirm whether the solenoid receives power when the key is turned. Replacing a solenoid is simple, but the battery should be disconnected and the cables should go back onto the same terminals they came from.
- Clean battery and starter terminals
- Check the ground strap for corrosion
- Confirm battery voltage before testing
- Keep cable positions recorded during removal
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17230.01 |
| Part type | Starter solenoid |
| Engine | 4 cylinder |
| Voltage | 12-volt |
| Terminals | 3 |
Vehicle fitment
It fits 1959 to 1960 and 1966 Jeep CJ3 (Base); 1959 to 1960 and 1966 to 1971 Jeep CJ5 and CJ6 (Base); 1955 Jeep Willys 1-Ton; 1956 to 1958 Jeep Willys Base; 1955 to 1958 Jeep Willys CJ-3 and CJ-5; 1956 to 1958 Jeep Willys CJ-6 and DJ-3; 1955 to 1957 Jeep Willys M38A1; and 1955 Jeep Willys Sedan Delivery and Utility Wagon.
Other CJ5 years, and CJ7 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The solenoid has 3 terminals, so match each cable to the terminal it occupied on your original part before reconnecting the battery.
What’s included
The set is one starter solenoid. Check mounting hardware and cable connectors against your installation before starting.









