Overview
The Omix-Ada 12004.11 is a driver side, front left replacement steel fender made to original Jeep specifications. It is primed for rust prevention and fits the CJ5, CJ6, CJ7 and Scrambler lineup.
It is a direct OE replacement with a limited five year warranty. The primer is there for rust prevention, and paint is applied separately.
Key features
- Driver side, front left position
- Steel panel built to original Omix-Ada specifications
- Primed for rust prevention
- Listed fitment across Jeep CJ5, CJ6, CJ7 and Scrambler models
Fit checks before painting
Fitting a CJ front fender is mostly about lining up the panel with its neighbors. Check the gap at the cowl, the opening around the headlight bucket and the edge along the door. Because these areas flex with age, the new panel may need small adjustments at the mounting points to sit cleanly.
Body mounts on older Jeeps often carry rust or hardened rubber. Inspect them before the panel is set, and replace worn bushings or brackets as needed. A solid mount keeps the fender from shifting when the vehicle is driven over rough trail.
Once the fit is right, apply a coating to the inside surfaces to slow future rust. Water collects behind a fender, and a coating helps protect the seams and lower edges. Apply it before reinstalling the panel so it reaches the areas that are hardest to see afterward.
- Check the cowl and headlight gaps
- Inspect body mounts and bushings
- Coat the inner surfaces before reinstalling
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12004.11 |
| UPC | 80431403824 |
| Material | Steel |
| Finish | Primed for rust prevention |
| Side | Driver side |
| Position | Front left |
| Fit type | Direct fit |
| Warranty | Limited five year warranty |
Vehicle fitment
It fits the 1972–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1972–1975 Jeep CJ6 (Base), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
Earlier CJ-series models and the Wrangler YJ are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the fit against the adjacent cowl, door and headlight openings while the panel is unpainted. If the body mounts are rusted or distorted, plan on body-shop help before the panel is set.
What’s included
One driver side, front left steel fender panel. Check the package contents against your installation before starting.









