Overview
The Omix-Ada 12004.12 is a passenger side, front right replacement steel fender for Jeep vehicles in the CJ5, CJ6, CJ7 and Scrambler range. It replaces the original body panel at the front right corner with a primed steel fender.
Omix-Ada made the panel to original specifications, and fitment covers the 1972–1983 CJ5, 1972–1975 CJ6, 1976–1986 CJ7 and 1981–1985 Scrambler.
Key features
- Front right, passenger side panel
- Steel construction with rust prevention primer
- Built to original Jeep specifications.
- Covers the four listed CJ-series and Scrambler entries
Fitting and aligning a fender
Aligning a replacement fender takes patience because the bolt holes and the body opening both need to line up. Start with the mounting bolts loose so the panel can move, then set the top edge against the hood and the front edge against the headlight. Snug each bolt in stages once the gaps look even.
Look at the adjacent parts too. A worn door hinge, a bent cowl or an old repair in the corner can make a new fender look off even when it is installed correctly. Correcting those issues first gives the panel a fair chance to sit straight. Work slowly, and re-check the gaps after the first drive.
- Loosen mounts before setting the panel
- Check hood and door gaps
- Inspect nearby hinges and cowl
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12004.12 |
| UPC | 80431403823 |
| Material | Steel |
| Finish | Primed for rust prevention |
| Side | Passenger side |
| Position | Front right |
| Fit type | Direct fit |
| Warranty | Backed by a limited five year warranty. |
Vehicle fitment
It fits the 1972–1983 Jeep CJ5 with Base, Golden Eagle, Laredo, Limited and Renegade trims, plus the 1972–1975 CJ6 (Base), the 1976–1986 CJ7 and the 1981–1985 Scrambler.
Match your year, model and trim to the fitment above before ordering.
Installation notes
Fit-check the panel before paint and before the final bolt-up, so any alignment issue is found while the panel is still easy to adjust.
What’s included
One passenger side, front right steel fender panel. Plan on sourcing hardware and finish paint separately.









