Overview
The Crown Automotive 55235227 is a replacement steel front fender for the driver side (front left) of the 1984–1996 Jeep Cherokee XJ. It comes primed for rust inhibiting and must be primed before paint is applied.
It is a direct fit for the XJ body across the trims below. Because it is a driver side panel, a passenger side fender is a separate part for the opposite side.
Key features
- Steel front left fender for the driver side
- Primed for rust inhibiting
- Covers the 1984–1996 Cherokee XJ trims in Crown’s list
- Must be primed before paint is applied.
Before you prime and paint
A replacement fender is one of the most visible panels on an XJ, so fit and finish matter as much as the sheet metal. Before any primer goes on, set the panel against the inner fender, the hood gap and the headlight opening. Small adjustments are far easier to make on bare metal than after paint has gone on, so take the time to trial fit it first.
Steel fenders often rust from the inside out, especially along the lower edges and around the wheel well. Check the area behind the fender for moisture or old corrosion before bolting it down. Replacing a fender without addressing the rust underneath often lets the same problem return within a few seasons.
On an older Cherokee, the fender works with the nearby bumper bracket, the inner splash shield and the wheel well trim. If any of those are cracked or bent, replace them at the same time so the new panel sits evenly. Keep the fasteners sorted by location to keep the gaps consistent during reassembly.
- Trial fit before any primer goes on
- Check the inner fender and wheel well for rust
- Inspect the bumper bracket and splash shield
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 55235227 |
| UPC | 848399021042 |
| Material | Steel |
| Finish | Primed for rust inhibiting |
| Position | Front left |
| Location | Driver side |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–1996 Jeep Cherokee (XJ) in Base, Chief, Country, Laredo, Limited, Pioneer, SE and Sport trims.
The list does not include the 1987–1995 Wrangler (YJ), the 1997–2006 Wrangler (TJ) or the Grand Cherokee models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan surface preparation and primer as separate steps before paint, and do not skip the primer stage.
What’s included
One driver side (front left) steel fender. Check the package contents, mounting hardware and paint against your installation before starting.









