Overview
The Omix-Ada 12004.13 is a driver side, front left replacement steel fender for the 1987–1995 Jeep Wrangler (YJ). Omix-Ada makes it as a direct OE replacement built to the original specifications, and it comes with a black primer finish.
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. Minor body work may be needed on the replacement panel before it is painted or fitted.
Key features
- Direct OE replacement, built to original specifications
- Driver side, front left position
- Black primer finish
- Limited five year warranty from the manufacturer
Replacement fender prep
A replacement steel fender usually arrives with a primer coat rather than finished paint, so plan for surface prep before the panel goes on the vehicle. Dry fit the fender first, check the gap to the hood and headlight area, and make small adjustments at the mounting points before any sanding or painting begins. Shops often find that the original bolt holes need a little tuning to line up with the cowl and inner fender.
Rust in the inner fender and along the cowl is the most common reason a fender gets replaced on an older Wrangler. Before ordering, look under the lip of the old fender for crumbling metal and check the mounting bracket for cracks. Replace the fender along with any damaged brackets or seam sealer, and apply body seam sealer where the new panel meets the adjacent metal to slow moisture intrusion.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12004.13 |
| UPC | 804314056261 |
| Location | Driver side |
| Position | Front left |
| Finish | Black primer |
| Fitment type | Direct fit |
| Warranty | Limited five year warranty from the maker |
Vehicle fitment
Fit is for the 1987–1995 Jeep Wrangler (YJ) in the trims named above. Confirm fit for your vehicle’s year, model and trim before ordering, especially for other Wrangler generations.
Other Wrangler generations, such as the 1997–2006 Jeep Wrangler (TJ) and 2007–2018 Jeep Wrangler (JK), are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Omix-Ada’s copy calls for professional installation. Because minor body work may be needed, check the panel fit against the body before painting.
What’s included
One driver side, front left replacement steel fender with a black primer finish. Minor imperfections or damage can occur in transit, and freight damage claims must be placed directly with the freight carrier.
Not included: Paint and mounting hardware are not included with this fender.








