Overview
The Omix-Ada 18271.02 is a rear spring shackle kit for one rear spring on Jeep vehicles, sold as a direct replacement for the original shackle.
The kit includes one shackle with bushings. It carries a limited five year warranty.
Key features
- Covers one rear spring only
- Shackle supplied with bushings
- Direct OE replacement built to original specifications
- Made by Omix-Ada, part number 18271.02
Rear shackle wear
Rear spring shackles carry the load of the spring as the axle moves up and down, so they wear at the bushings and pivot pins over time. Loose shackles can allow the rear to shift and make the vehicle feel unstable on uneven ground. Replacing the shackle with bushings is a common repair when the old unit has cracked rubber or sloppy movement.
Before replacing a rear shackle, inspect the spring eye, hanger and bolts, since damage in those parts can reappear quickly. Tighten the shackle nuts after the vehicle settles on the ground, and recheck them after the first few drives. Watch the new bushings for cracks and squeaks, which often signal the need for lubrication or further service.
- Inspect the spring eye for wear
- Check the frame hanger for cracks
- Retighten fasteners after the first drives
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18271.02 |
| UPC | 804314141110 |
| Type | Rear spring shackle kit |
| Position | Rear, one rear spring |
| Included hardware | Shackle with bushings |
Vehicle fitment
Confirm fit for your Jeep’s year, model and rear spring before ordering. No year, model or trim is confirmed for this kit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear spring shackle kit with bushings.
Not included: the leaf spring itself is not part of this kit.









