Overview
The Trail Gear 111313-1-KIT is a greasable shackle plate kit for leaf spring shackles and works at the front or rear. Threaded zerk fittings allow the shackle to be greased, and Polly bushings come with the kit.
Trail Gear builds the kit with factory size 18mm bolts and crimp nuts, and the plates are zinc plated.
Key features
- Threaded zerk fittings for greasing
- Zinc plated plates
- Polly bushings included
- Factory size 18mm bolts with crimp nuts
- Works at the front or rear
Greasing and maintenance
Greasable shackles need regular lubrication to keep the bushings and pins moving freely. Grease the zerk fittings after installation and again after running through mud or water, since grit can push out old lubricant. A fitting that will not take grease often means the passage is clogged and should be cleared before the next service.
Plate kits with bolts and crimp nuts should be checked for tightness after the first few drives, because new fasteners can settle. Look for cracked plates, rounded bolt heads and worn bushings at each inspection. Keeping the greasing routine consistent helps the pivot stay smooth, and any stiffness or squeaks are early signs the shackle needs attention.
- Grease after mud or water exposure
- Retighten fasteners after the first drives
- Inspect bushings at each service
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 111313-1-KIT |
| UPC | 70000621446 |
| Type | Greasable shackle plate kit |
| Bolt size | 18mm, factory size |
| Fasteners | Crimp nuts |
| Finish | Zinc plated |
| Lubrication | Threaded zerk fittings |
| Bushings | Polly bushings included |
| Length | 6 in |
| Stock shackle spacing | 3.5 in between holes, measured center to center |
| Position | Front or rear |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. The plates work at the front or rear, so match the position to your leaf spring.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Grease the zerk fittings after installation, and compare the hole spacing with the stock 3.5 in measurement before fitting. Support the vehicle securely while the spring shackles are replaced.
What’s included
Polly bushings are included with the kit.
Not included: Vehicle-specific mounting hardware and leaf springs are not part of the kit.









