Overview
The Skyjacker L40FS is a front Softride leaf spring for the 1967 to 1980 Toyota Land Cruiser (Base). It is a single front spring, and two are needed for a pair.
It is a progressive multileaf pack made from American steel, with a load capacity that matches or exceeds the original equipment spring. It carries a limited lifetime warranty. Bushings are not included, and the recommended bushing part number is SKYSE40L.
Key features
- Front position progressive multileaf spring
- American steel construction
- Load capacity matches or exceeds the original equipment spring
- Limited lifetime warranty stated by Skyjacker
- Recommended bushing part number SKYSE40L, not included
Front springs on older Land Cruisers
Front leaf springs on older Land Cruisers work hard over rough terrain, and their condition shapes steering feel, ride height and how the front tires wear. Once a spring begins to sag or lose arch, the front end can sit lower on one side and pull the truck off line. Replacing the spring as a pair keeps the front end balanced and the steering consistent.
Because bushings come separately, plan for them before the old spring is pulled. Inspect the spring perches, U-bolts and shackle hardware at the same time, since worn hardware can let the new spring shift. Old frames can also show corrosion around the spring mounts, so a quick look with a flashlight is worthwhile.
After installation, recheck the hardware once the truck has been driven a bit, and have the front alignment inspected. Listen for new clunks or squeaks, which often point to a bushing that is not seated correctly.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | L40FS |
| UPC | 803696145808 |
| Position | Front |
| Spring quantity | Single spring (order 2 for a pair) |
| Bushings included | Bushings not included |
| Recommended bushing part number | SKYSE40L |
| Lift height range | 0 to 4.99 inches |
| Material | American steel |
| Construction | Progressive multileaf pack |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1967 to 1980 Toyota Land Cruiser (Base).
The list does not cover Land Cruiser years after 1980 or other Toyota models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushings are not included, so have the recommended bushing, part number SKYSE40L, ready before mounting. Support the vehicle on stands before removing the front spring.
What’s included
One front spring, sold as a single unit.
Not included: Bushings. The recommended bushing is part number SKYSE40L.







