Overview
The Pro Comp 31253 is a single 2.5 inch rear leaf spring with polyurethane bushings included. It is designed to fit the 1967–1980 Toyota Land Cruiser.
The spring has a diamond cut multi-leaf design. The diamond cut leaves and urethane bushings add extra clearance and better ride quality than a stock spring.
Key features
- Diamond cut multi-leaf design
- Polyurethane bushings included
- 2.5 inch lift height
- Rear mounting position
- Sold as a single spring
Pinion angle and driveline
A rear lift changes the angle between the transmission output and the pinion. When that angle grows too steep, the driveline can vibrate, wear the U-joints early and cause a shudder under acceleration. Measuring the angle after installation shows whether the driveline is working within a safe range.
Shock length and travel also matter after a rear spring change, because the axle sits in a new position. Check that the shocks are not bottoming out and that brake lines and the driveline have clearance at full travel. A careful check of the rear suspension on a safe surface can reveal binding early.
- Measure pinion angle after installation
- Inspect U-joints and slip yoke for wear
- Check brake line clearance at full droop
- Re-check U-bolt torque after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 31253 |
| UPC | 614901140293 |
| Lift height | 2.5 inch |
| Position | Rear |
| Quantity | Single spring |
| Bushings | Polyurethane, included |
| Design | Diamond cut multi-leaf |
Vehicle fitment
It is designed for the 1967–1980 Toyota Land Cruiser, and other Toyota models and years fall outside that fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 2.5 inch rear spring raises the rear of the vehicle and changes pinion angle, so check the pinion angle and driveline after installation.
What’s included
One rear leaf spring with polyurethane bushings included.









