Overview
The Omix-Ada 18880.41 is a needle roller bearing for the T90 transmission, built to original specifications for early Jeep CJ and Willys models from 1946 through 1971.
Confirm fit for your model year before ordering, since the CJ3, CJ5 and CJ6 years differ from the Willys years. The bearing carries a limited five year warranty from Omix-Ada.
Key features
- Needle roller design
- Built to original specifications by Omix-Ada.
- Fits T90 transmissions.
- Covers CJ and Willys models from 1946 to 1971
Replacing a T90 bearing
Needle roller bearings support a shaft under heavy radial load while taking up very little space. In a manual transmission, bearings like this one carry gear and shaft loads, so a worn bearing often shows up as whining or rough shifting, especially under load. Replacing one usually means removing the affected shaft or cover, so plan the job around the rest of the gearbox.
When inspecting, look for flat spots, heat discoloration or rollers that feel gritty when turned by hand. Clean the bore and shaft seats thoroughly before pressing in a new bearing, and use a driver that seats on the outer race so the new part is not damaged. Replace the fluid at the same time to flush out metal debris from the old bearing.
- Check the shaft and bore for scoring before fitting
- Replace seals and gaskets that come off during disassembly
- Keep the bearing and seats clean to avoid early wear
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18880.41 |
| UPC | 804314009854 |
| Type | Needle roller bearing |
| Transmission | T90 |
| Warranty | Limited five year manufacturer warranty |
Vehicle fitment
It fits the Jeep CJ3 (1959-1960), CJ5 and CJ6 (1959-1960 and 1966-1971), and the Willys CJ-2 (1946-1949), CJ-3 (1949-1958), CJ-5 (1955-1958) and CJ-6 (1956-1958).
Confirm fit for your vehicle’s year, model and trim before ordering, especially for CJ7, Wrangler and Cherokee applications.
What’s included
Confirm the bearing count against your installation before starting.









