Overview
The Omix-Ada M20 gasket and seal kit, part number 18603.02, is made for the M20 transfer case. It fits 1972-1979 Jeep CJ5, 1972-1975 CJ6 and 1976-1979 CJ7 models.
The kit contains the seals and gaskets for this transfer case: two shift rod oil seals, two output shaft oil seals and five gaskets.
Key features
- Two shift rod oil seals
- Two output shaft oil seals
- Five gaskets
- Direct fit for the listed 1972-1979 CJ models
Before you install
A transfer case gasket and seal kit replaces the parts that keep lubricant inside the case and stop leaks at the shift rods and output shaft. On older CJ models these seals tend to harden over time, and a leak often shows up as oil on the case housing or drips under the vehicle after a drive. Before pulling the case apart, drain the fluid, clean the mating surfaces and look for pitting or warped flanges that a new gasket will not fix.
Shift rod seals and output shaft seals are often replaced together because they are reached during the same teardown. Gaskets should match the old ones in shape and bolt pattern, and sealant should be used only where the shop procedure calls for it. Keep the old parts for comparison, and check the fluid level and fill plug once the vehicle has been driven a short distance.
- Inspect the shift rod bores for wear before fitting new seals
- Replace gaskets rather than reusing them once separated
- Use the correct transfer case fluid after assembly
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18603.02 |
| UPC | 804314045487 |
| Transfer case | M20 |
| Shift rod oil seals | 2 |
| Output shaft oil seals | 2 |
| Gaskets | 5 |
Vehicle fitment
It fits the 1972-1979 Jeep CJ5 (Base, Golden Eagle, Renegade), 1972-1975 Jeep CJ6 (Base) and 1976-1979 Jeep CJ7 (Base, Golden Eagle, Renegade). It does not cover models from 1980 onward. Confirm fit for your vehicle’s year, model and trim before ordering.
Models from 1980 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes 2 shift rod oil seals, 2 output shaft oil seals and 5 gaskets.









