Overview
The Omix-ADA 18002.03 is a manual steering sector shaft oil seal for six Jeep model ranges, including the 1972–1983 CJ5, 1976–1986 CJ7 and 1981–1985 Scrambler.
It is made for manual steering gears, not power steering. It replaces the factory part and is backed by a limited five year warranty from Omix-ADA.
Key features
- Manual steering sector shaft oil seal
- Covers CJ5, CJ6, CJ7, Scrambler and SJ-series Wagoneer models
- Part number 18002.03 with UPC 804314029630
- Limited five year warranty from Omix-ADA
Before you buy
A sector shaft seal works where the shaft leaves the steering gear housing, so its main job is holding lubricant in. When it fails, the first sign is usually oil on the outside of the gear housing or on the inside of the front wheel. Oil that collects there can drip onto the frame and make leaks hard to trace.
Because the seal presses against a moving shaft, the shaft surface matters as much as the seal. A grooved or pitted shaft will wear a new seal quickly. Many mechanics inspect the shaft and bore before fitting a new seal, and they often refresh the steering gear lubricant at the same time so the new seal starts clean.
- Look for seepage at the gear housing before removing parts
- Inspect the shaft surface for grooves or pitting
- Refresh the gear lubricant when the gear is opened
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18002.03 |
| UPC | 804314029630 |
| Part type | Manual steering sector shaft oil seal |
| Steering type | Manual |
| Warranty | Limited five year warranty |
| Fitment type | Direct fit |
Vehicle fitment
It fits the following vehicles:
- 1972–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1972–1975 Jeep CJ6 (Base)
- 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
- 1984–1986 Jeep Grand Wagoneer (SJ) (Base, Limited)
- 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
- 1974–1986 Jeep Wagoneer (SJ) (Base, Brougham, Custom, Limited)
Wrangler, Cherokee and Comanche models are not in this list, and years outside the ranges above are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing an oil seal on a sector shaft usually means removing the shaft or pulling the steering gear apart. Taking a steering gear apart is work for an experienced mechanic.
What’s included
Check the package contents against your installation before starting.









