Overview
The Omix-ADA 16535.02 is a rear inner axle seal for Dana 44 axles, sold per axle. It fits the 1970 to 1975 Jeep CJ5 in the Base and Renegade trims, and the 1986 Jeep CJ7 in the Base, Laredo and Renegade trims.
The inner seal sits where the axle shaft enters the rear housing. It is made for the rear inner position.
Signs of a worn inner seal
The rear inner seal sits where the axle shaft enters the housing, so it keeps the gear oil inside the rear axle. Oil that leaks past it can reach the brake drum and the inside of the wheel, which reduces grip. A seal with a hardened or torn lip should be replaced rather than patched.
Most owners replace the seal while the axle is open for another job, such as a bearing or brake service. Clean the housing bore and check the shaft surface before fitting the new seal. Use fresh gear oil to the level your axle requires, and check the seal again after the first few drives.
- Oil on the inside of the rear wheel
- Torn or hardened seal lip
- Grooved shaft at the seal contact area
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16535.02 |
| UPC | 804314021443 |
| Axle | Dana 44 |
| Position | Rear inner |
| Quantity | Per axle |
Vehicle fitment
It fits the 1970 to 1975 Jeep CJ5 (Base and Renegade) and the 1986 Jeep CJ7 (Base, Laredo and Renegade).
Other CJ years, the Wrangler and the Cherokee are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One inner axle seal per axle. No bearing or retainer is included.









