Overview
The Omix-ADA 16535.01 is a rear inner axle seal for Dana 44 rear axles with tapered axle shafts. It fits the 1967 to 1969 Jeep CJ5 in the Base trim.
A rear inner axle seal sits at the inner end of the axle shaft and keeps gear oil inside the axle housing. This seal is made for tapered shafts, so confirm your shaft type before ordering.
Tapered shaft basics
Tapered axle shafts use a cone shape at the bearing seat, which carries load differently from a straight shaft. Mixing shaft and seal designs leads to leaks and early wear, so the shaft type matters as much as the seal size. Measure the shaft end or compare it with the old parts before buying.
An inner seal works best when the shaft surface is smooth and free of grooves. If the old seal has worn a groove, a new seal will leak until the surface is cleaned or the shaft is replaced. Work with a clean housing, fresh gear oil and careful seating of the seal lip.
- Confirm the axle is a Dana 44 rear
- Inspect the shaft surface for grooves
- Use fresh gear oil at the correct level
- Replace the seal with the axle drained
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16535.01 |
| UPC | 804314009922 |
| Axle | Dana 44 rear |
| Shaft type | Tapered axle shafts |
| Position | Rear inner |
Vehicle fitment
It fits the 1967 to 1969 Jeep CJ5 in the Base trim.
The list covers only the CJ5 years above. Later CJ models, the Wrangler and the Cherokee are not on it. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear inner axle seal is included. No bearing, cup or retainer comes with it.









