Overview
The Crown Automotive J0640959 is an inner axle seal for Dana 44 rear axles with tapered axle shafts. It fits the 1949 to 1952 Willys CJ-3, the 1960 to 1969 Jeep CJ5, the 1966 to 1968 CJ6 and the 1967 to 1968 Jeep Commando.
An inner axle seal sits at the inner end of the axle shaft and keeps gear oil in the housing. It is made for the rear inner position.
Seal wear and axle oil checks
An inner axle seal is the main barrier between gear oil in the axle housing and the bearing area near the hub. Leaks often show as oil drips on the inside of the wheel or brake backing plate. Before replacing the seal, check the bearing for play or roughness and inspect the axle shaft end for grooves where the seal lip rides.
When a seal is pulled, the lip surface should be clean and smooth. Light scoring can be cleaned up, but deep grooves usually call for a different approach. Install the new seal with its lip facing the correct direction, keep it square in the housing, and fill the axle to the correct level once the job is complete. Check for seepage after a short drive and again after the first few longer runs.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0640959 |
| UPC | 848399052268 |
| Axle | Dana 44 rear |
| Shaft type | Tapered axle shafts |
| Position | Rear inner |
Vehicle fitment
It fits the 1960 to 1969 Jeep CJ5 (Base), the 1966 to 1968 Jeep CJ6 (Base), the 1967 to 1968 Jeep Commando (Base) and the 1949 to 1952 Willys CJ-3.
Later CJ, Cherokee, Wrangler and Grand Cherokee models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one inner axle seal.














