Overview
The G2 Axle and Gear axle shaft seal is built for Dana 44 axles that use upgraded 35 spline axle shafts. It is forged from high strength 8620 steel and heat treated for long service life.
It is designed for high performance applications and carries a 10 year warranty.
Key features
- Forged from high strength 8620 steel
- Heat treated for long service life
- Designed for high performance applications
- For upgraded 35 spline axle shafts on Dana 44 axles
- Carries a 10 year warranty.
Before you install
Axle shaft seals keep lubricant inside the axle housing and keep dirt and water out where the shaft passes through the housing. When a seal wears, the usual sign is grease or gear oil on the inside of the wheel or on the brake backing plate. A seal that is failing should be replaced before the bearing runs low on lubricant. Because the seal sits at the axle end, replacing it usually means removing the axle shaft, so plan the job as a full shaft service.
When choosing a seal, match the shaft type first. Upgraded shafts can differ from stock parts in spline count and diameter, so confirm the spline count of your shafts before buying a replacement. Seals are often replaced together with bearings and gaskets. Checking bearing play while the shaft is out is a good chance to catch wear early. Clean the seal bore and check it for scoring before the new seal goes in.
- Inspect the bearing while the shaft is out
- Check the seal bore for scoring
- Replace gaskets alongside the seal
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| UPC | 682034346653 |
| Axle | Dana 44 |
| Spline count | 35 |
| Material | 8620 steel, forged |
| Heat treatment | Heat treated |
| Warranty | 10 year |
Vehicle fitment
No vehicle fitment is stated. The seal is for Dana 44 axles with upgraded 35 spline axle shafts, so confirm your shaft type before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the axle shafts are upgraded 35 spline units, since the seal is described only for those.
What’s included
Not included: Axle shafts. The seal is for use with upgraded 35 spline shafts.








