Select your vehicle

Omix-ADA Front Passenger Side Fender Flare – 11601.02

Omix-Ada

Shop Jeep CJ5 Fender Flares on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement front passenger side flare, Omix-Ada part 11601.02
  • Fits CJ-3, CJ-5, CJ-6, CJ-7 and Scrambler models, 1955–1986
  • Thermoplastic, UV-treated, direct fit
  • Mounts in factory holes, with hole relocation possible on some models
  • Single flare, not a kit

Description

Overview

The Omix-Ada 11601.02 is a single replacement front passenger side fender flare, listed under Omix-Ada part number OAI11601.02, for Jeep CJ-3, CJ-5, CJ-6 and CJ-7 models and the Scrambler from 1955 to 1986. Omix-Ada makes a factory-style replacement flare that bolts into the original mounting holes.

The flare is made of UV-treated thermoplastic that resists sun damage and holds up to long service. It is designed to replace a worn or damaged flare or to upgrade an original one, and it is a direct fit for the CJ-3, CJ-5, CJ-6, CJ-7 and Scrambler models.

Key features

  • Front right position, the passenger side on the listed models
  • Factory-style replacement shape
  • UV-treated thermoplastic that resists sun damage
  • Designed to fit the factory mounting holes
  • Covers CJ-3, CJ-5, CJ-6, CJ-7 and Scrambler models from 1955 to 1986

Mounting a replacement flare

A replacement flare is a sheet-metal and hardware job, even when the part is designed for the factory holes. Before fitting, compare the new flare with the old one, check the edges for flash or distortion, and make sure the lip sits flat against the body. A flare that is pulled into place with force can crack at the mounting points.

Older Jeeps often have brittle or corroded hardware, so clean the threads and check each hole before tightening. Replace any fastener that is stripped or bent. Once the flare is on, look along the body line to confirm it sits level with the other side, since a crooked flare is easier to spot than a small gap.

  • Compare the new flare with the old one before fitting
  • Clean threads and check holes
  • Replace stripped or bent fasteners

Specifications

Brand Omix-Ada
Part number 11601.02 (Omix-Ada part number OAI11601.02)
UPC 804314037116
Position Front right (passenger side)
Quantity One flare
Material UV-treated thermoplastic
Fitment type Direct fit

Vehicle fitment

It fits the 1959–1966 Jeep CJ3, the 1959–1983 Jeep CJ5, the 1966–1968 Jeep CJ5A, the 1959–1975 Jeep CJ6, the 1966–1968 Jeep CJ6A, the 1976–1986 Jeep CJ7, the 1981–1985 Jeep Scrambler, and the 1955–1958 Jeep Willys CJ-3, CJ-5 and CJ-6.

Jeep Wrangler, Cherokee and later models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

The flare is designed to fit the factory mounting holes. If the factory hardware is rusted, some hole modification may be needed.

What’s included

One replacement front right fender flare. Check the package contents against your installation before starting.

SKU: OAI11601.02 Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 48.00 × 24.00 × 6.00 in
brands

Fitment

VehicleYearsTrims
Jeep CJ31959–1966Base
Jeep CJ51959–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ5A1966–1968Base
Jeep CJ61959–1975Base
Jeep CJ6A1966–1968Base
Jeep CJ71976–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade
Jeep Scrambler1981–1985Base, Laredo, Renegade, SL, SR
Jeep Willys CJ-31955–1958All
Jeep Willys CJ-51955–1958All
Jeep Willys CJ-61956–1958All

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 11601.02 fit a 1980 Jeep CJ7?

Yes. It fits the 1976–1986 Jeep CJ7, and 1980 falls inside that range. The Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims are covered, so confirm your trim before ordering.

Is this the driver side or the passenger side flare?

It is the front right flare, which is the passenger side on the listed models. The driver side front flare is a separate part, 11601.03, so order the side that matches the damage on your vehicle.

Does it need drilling?

Omix-Ada designs it to fit the factory mounting holes. If the factory hardware is rusted, some hole modification may be needed, so inspect the hardware and holes before mounting the flare on the vehicle.

How can a new flare be protected from sun damage?

Keep the flare clean and avoid harsh solvents, which can dull the surface over time. Parking in shade when possible also limits UV exposure. Inspect the edges periodically for chalking or cracks, especially on an older vehicle that is used outdoors.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep CJ5 Fender Flares on Amazon