Overview
The Omix-ADA 17467.24 is a standard-size connecting rod bearing built to original specifications as a direct OE replacement. It fits Jeep models from 1971 through 2002, including Cherokee XJ and SJ, CJ, Comanche and Wrangler YJ and TJ.
Omix-ADA backs this bearing with a limited five year warranty. It is a direct fit, and the vehicle fitment section shows which Jeep models it covers.
Key features
- Standard size
- Direct OE replacement built to original specifications
- Limited five year warranty from Omix-ADA
- Omix-ADA part number 17467.24, marked Direct Fit
Choosing and fitting rod bearings
Connecting rod bearings are thin shell bearings that sit between the connecting rod and the crankshaft journal. They carry the load of each piston’s combustion force and rotate on a thin film of oil, so their fit and surface condition matter for engine life. Wear usually shows up as a knock that changes with engine speed, a drop in oil pressure, or metal flakes in the oil filter.
When choosing a bearing, match the size to the crankshaft and confirm the engine family before ordering. Bearings are often replaced together with a fresh oil pump check, new rod bolts and clean oil passages, since a rebuild that reuses worn parts can undo the new bearings. Check oil clearance with plastigage during assembly and follow the torque and clearance steps in your service procedure.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17467.24 |
| UPC | 804314042219 |
| Size | Standard |
| Construction | Built to original specifications |
| Warranty | Limited five year warranty |
| Fitment marking | Direct Fit |
Vehicle fitment
It fits 1974–1983 Cherokee (SJ), 1984–2000 Cherokee (XJ), 1972–1983 CJ5, 1972–1975 CJ6, 1976–1986 CJ7, 1986–1992 Comanche, 1972–1973 Commando, 1972–1974 DJ5, 1984–1991 Grand Wagoneer (SJ), several 1972–1973 J-series trucks, 1974–1988 J10 and J20, 1981–1985 Scrambler, 1971–1990 Wagoneer (SJ), 1997–2002 Wrangler (TJ) and 1987–1995 Wrangler (YJ).
Wrangler TJ models from outside 1997–2002 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Rod bearing replacement requires removing the oil pan and rod caps, and clearances should be checked during assembly. An engine builder or an experienced rebuild mechanic is the right choice for this job.
What’s included
The bearing is identified by part number 17467.24. Check the package contents against your installation before starting.









